Messages

21

General Mach Discussion / Re: Motors stalling /growling

« on: May 20, 2019, 08:44:24 PM »

I finally was able to down load the xml file and had to do a lot of fine tuning. The x axis runs very good on the mach 3 demo. The y axis was harder to tune and it also will run on the demo, but when trying to run both the x and y on the demo they start growling and sometimes stop. I have tried two different computers and a second breakout board. still have the same problem. I don't know what to try next. Any help is appreciated.

22

General Mach Discussion / Re: Motors stalling /growling

« on: May 15, 2019, 08:42:53 PM »

I will give it a try.
Thanks

23

General Mach Discussion / Re: Motors stalling /growling

« on: May 14, 2019, 08:39:06 PM »

Here is my XML file.

24

General Mach Discussion / Re: Motors stalling /growling

« on: May 13, 2019, 03:56:01 PM »

 Can you explain what xml stands for?? I would be glad to post.
thanks

25

General Mach Discussion / Re: Motors stalling /growling

« on: May 13, 2019, 09:53:07 AM »

Thanks for the information. I've try every setting that has been recommended and still have problem. So i guess i'll be looking at other options until i can get the problem solve. 
Thanks

26

General Mach Discussion / Re: Motors stalling /growling

« on: May 11, 2019, 08:17:50 PM »

Craig, Will you explain what is a ESS? Is that a breakout board?

27

General Mach Discussion / Re: Motors stalling /growling

« on: May 10, 2019, 03:53:55 PM »

so does that indicate that my problem would be in the software or maybe the breakout board? just trying to narrow it down.

28

General Mach Discussion / Re: Motors stalling /growling

« on: May 10, 2019, 03:41:14 PM »

here is the driver test screen.

29

General Mach Discussion / Re: Motors stalling /growling

« on: May 10, 2019, 10:09:16 AM »

it is a desktop, don't know model and size, not looking at right now, but will try to increase the kernel speed. thanks, headache is right.

30

General Mach Discussion / Re: Motors stalling /growling

« on: May 10, 2019, 08:58:35 AM »

I am having trouble loading the pic of the driver test still working on that.