Messages

71

LazyCam (Beta) / lazycam fonts...the sweet ones!

« on: April 02, 2008, 11:40:36 AM »

Hi Guys,
  I reloaded the newer version of LC, and have lost some
real nice text fonts: the variety initially offered were awesome!
  Is there something I have missed on version  Lc 3.00.2 that
I could go back and punch in the missing varieties (of fonts), or was it found necessary
to streamline the operation and dispose of  unused fonts to save the download
size for some technical reason?
  I don't have a specific font that I am asking about, but some of the titles were
possibly "creepy girl" and " cracked johnny" (those names seem to stick in the
mind)  Don't know why!
  I am using licensed version R3.039 Mach 3..great software Art and Brian and all contributors!
 
  Hood and Brett..you guys scare me!

  Cheers, Glenn

72

Show"N"Tell ( What you have made with your CNC machine.) / Re: Helical Gear cutting with Mach3

« on: March 31, 2008, 10:17:06 PM »

Hi jluisrey,
   Great gear!  How many axis does this process require,and
how deep of a cut can you take on each pass?
   Also..Do you write your own code or what program
do you use to generate it?

  Thanks,
 Glenn

73

General Mach Discussion / Re: Turn cant find Set file

« on: March 27, 2008, 09:02:21 PM »

Where'd you lay your pickup truck keys?
  Seems like I always lose mine after I Read this forum and
get schooled from Hood, Brian, Brett, and the rest of the gang!
  Great job fellows!
  Glenn

74

General Mach Discussion / Re: EStop problem/question

« on: March 17, 2008, 03:35:53 PM »

Hey BluePinnacle,
  Thanks for further detailing your set-up, I am anxious to assemble a system like yours, and knowing what size relays to buy helps alot. I appreciate your help!
Radio Shack, here I come,
  Glenn

75

General Mach Discussion / Re: EStop problem/question

« on: March 16, 2008, 08:06:52 PM »

Okay, BluePinnacle,
  Please explain further your relay switches on the limit and estops, because this sounds good but complicated 
 Can you give us a diagram and description of your relays?
  Thanks,
   Glenn

76

Show"N"Tell ( What you have made with your CNC machine.) / Re: RC scale airplane propeller blades.

« on: March 15, 2008, 08:32:53 PM »

Hi, Great blades!
  What will you coat these with to protect them from moisture, and did you do much sanding or did the router put that smooth
of a finish on them?
 Thanks ,
 Glenn

77

Show"N"Tell ( What you have made with your CNC machine.) / Re: Eagle on a Globe

« on: March 15, 2008, 08:25:05 PM »

Great job Cory
   How tight of a fit did you get when assembling all the pieces? how many parts all together?
 What is the eagle's wingspan?
 Awesome!
 Glenn

78

General Mach Discussion / Re: Dumb question from a Newby !

« on: March 07, 2008, 08:00:36 PM »

Hi wwdusty,
Have you tried highlighting the z axis dro, change the value, then hit enter.
  If you have the Mach license, hit the run from here button, but be careful, it really flies back fast!
  Hope this helps,
Glenn

79

General Mach Discussion / Re: monitor too small

« on: February 29, 2008, 11:52:10 PM »

Hi Again,
 Sorry about the unnecessary Thread, when my 19 yr. old son got home, he fixed this simple problem by right clicking the
desktop, left clk properties,lft clk settings,slide the screen resolution to the right, and it fixed it.
  Mach3 is Awesome (patiently awaiting lazyturn pro)
   Thanks,  Glenn

80

General Mach Discussion / monitor too small

« on: February 29, 2008, 11:02:09 PM »

Hi Art & Gang,
 I have a  different monitor now (15 inch) and while trying to size mach3 to fit, the config. page does not totally show up, so I can't hit the "okay" button while trying to "fit to screen " 'cause alot of the outer edges are cut off, hitting enter does not lock my check mark in, and re-booting didn't get it either. Are there other options to lock in the option of "fit to screen size" without seeing or clicking the okay button?
I searched mach forum and couldn't find a solution, please redirect me if this has already (most certainly it has) been covered and resolved. Thanks! Glenn