Hello Guest it is January 24, 2022, 09:03:40 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - diego

Pages: 1
General Mach Discussion / Re: JP-1635A driver for A axis or rotary
« on: September 30, 2018, 08:49:11 AM »
hi, this is what i got: windows xp, 32 bits,mach3 , parallel port, 3 axis x,y,z moving. cnc router 6040z from China i bought in ebay 1 year ago, no guarantee now. JP-1635A is driver only for A axis or rotary axis, this driver has 2 leds 1 red, 1 green, the red is on, the green is off (when i turn on control box, of course). The drivers for x,y,z  have green leds on when i turn on control box (computer off/on).
The problem i have is with driver for 4 axis or Aaxis or rotary axis, is not moving, red led is on all the time (computer on/off), my question is how this driver for A axis can be turn off and green led can turn on all the time? its simple question, but is electronic problem or control box problem? i changed driver a axis, same, i changed board jp-845 , this board has port for 4 axis, parallel , same problem. The control box has a little box inside , is the vfd  inverter, "nowforever",  the only remain for change. This vfd has  al ot of parameters, to control drivers, i dont know about it. I cannot move 4 axis with mach3 coz red led is on, so is not windows xp, is not mach3 program, is this driver , but is new, and jp-845 is new. wht's the problem? i need a guru help me  !!! thanks

General Mach Discussion / Re: JP-1635A driver for A axis or rotary
« on: September 29, 2018, 11:41:27 PM »
thanks, the red led is on without plug parallel cable to computer, no sense , to plug in yet coz is red, no green , thats the problem. Machines is pc 32 bits , mach3, windows xp, no problem with that its with controller box specific, something there vfd settings, or switches, i changed now on, on, on, 3 switches to obtain 3A, and 16 subdivisions (?), more the better, it change led status to red and green on, when i plug and unplug A axis. Its last thing doing this driver A axis.

General Mach Discussion / JP-1635A driver for A axis or rotary
« on: September 29, 2018, 09:33:51 PM »
Hi guys, i need help with this driver , when i turn on control box, red led turn on , no green, meaning its a problem and i can not do nothing with mach3, the 4th axis part no moves. So, how i can turnoff red led and on green led? thanks

Pages: 1