Messages

1

Mach3 under Vista / Re: Application Watchdog Triggered Error

« on: April 18, 2018, 10:16:50 PM »

I've emailed them and just posted to their forum. Hopefully someone will get back to me soon. Thanks.

2

Mach3 under Vista / Re: Application Watchdog Triggered Error

« on: April 18, 2018, 09:55:46 PM »

Warp9 ESS with a Gecko g540... Mach3 R3.043.062 with a legit license

3

Mach3 under Vista / Re: Application Watchdog Triggered Error

« on: April 18, 2018, 09:35:47 PM »

Even if that were the case, it would only be suppressing the issue and not resolving it. With the watchdogs off, I get an issue with the PWM signal that maxes out the router for some reason.

4

General Mach Discussion / Re: Mach3 w/smoothstepper and EStop issue...

« on: April 18, 2018, 09:33:54 PM »

I've adjusted the watchdog timer and still get the same issue. I can't find any reference anywhere to "Application Watchdog" and what it might mean. A lot pf people report Driver watchdogs but not Application.

5

Mach3 under Vista / Re: Application Watchdog Triggered Error

« on: April 18, 2018, 12:01:05 AM »

I've tried turning off the watchdog option and it doesn't seem to help. I still get the same error message on start up and random e-stops.

6

Mach3 under Vista / Re: Application Watchdog Triggered Error

« on: April 17, 2018, 03:20:16 PM »

Any luck on the 'Application Watchdog Triggered' error? I'm getting the same message and I'm having random e-stops that need the controller power cycled to reset.

7

General Mach Discussion / Re: Mach3 w/smoothstepper and EStop issue...

« on: April 17, 2018, 03:19:06 PM »

Any luck on the 'Application Watchdog Triggered' error? I'm getting the same message and I'm having random e-stops that need the controller power cycled to reset.