1
General Mach Discussion / Re: mach3 randomly doesnt follow the correct toolpath
« on: February 15, 2018, 01:49:39 PM »
I got the UC300 and the breakout board and stuff yesterday evening and i did connect them and rewire everything today and right now ,i immediately felt the difference ,for the first time i was able to reserve the direction of the axis in the home and limits options... not replacing the wires or etc...
i also can feel the sound of the machine has got better ,smoother ! i dont know why is that! but im happy about it !
right now ,i put one of the long gcodes that it couldnt run right and it would make at least a couple mistake during doing it (which was changing the coordinates)....
i am doing it on air ,like one of our friends here suggested it... so i dont waste the material...it will be finished in a couple of hours... then i will put the real work on it ! to see how it does !thank you guys for helping me ! i am so thankful and so excited to work with it
i also can feel the sound of the machine has got better ,smoother ! i dont know why is that! but im happy about it !
right now ,i put one of the long gcodes that it couldnt run right and it would make at least a couple mistake during doing it (which was changing the coordinates)....
i am doing it on air ,like one of our friends here suggested it... so i dont waste the material...it will be finished in a couple of hours... then i will put the real work on it ! to see how it does !thank you guys for helping me ! i am so thankful and so excited to work with it