Messages

1

Building or Buying a Wood routing table.. Beginnners guide.. / Re: need help plssssss

« on: December 20, 2017, 04:19:45 AM »

Yes thank you I tray whit a program with less line and is working, thank for lighting my life I will buy the program

2

Building or Buying a Wood routing table.. Beginnners guide.. / Re: need help plssssss

« on: December 19, 2017, 02:59:26 PM »

this is the movie whith problem

https://vimeo.com/248034301

3

Building or Buying a Wood routing table.. Beginnners guide.. / need help plssssss

« on: December 19, 2017, 02:37:51 PM »

Hello
I use this forum because I have no solution to my problem. i was building my cnc and I used a MACH 3 MOTION CARD MKX IV controller, the problem is that when I open a Gcode file in Mach 3 with the plugin for this card it is totally different from what I designed, if I disable the NcUsbPod plugin then mach3 open the file Gcodem I tried to change the format (tap, nc, ncc, gcm etc.,) the same result

4

General Mach Discussion / Re: XHC Mach3 4-axis control card

« on: December 19, 2017, 02:16:18 PM »

problem is if i open the Gcode whitaut ncplugin is working perfect m but when i select the plugin mach 3 dont see in the same way the same Gcode. i have a movie whith this problem but i dont know hau to post
  ALEX HE i send you this movie on skipe

5

General Mach Discussion / Re: XHC Mach3 4-axis control card

« on: December 18, 2017, 01:38:19 AM »

Thanks but now is to late, but whay mach3 is no opening corect the program from fusion-360 you have some ideas?

6

General Mach Discussion / Re: XHC Mach3 4-axis control card

« on: December 17, 2017, 11:14:12 PM »

Hello, I built my own cnc and I use Mach 3 mk IV controller and I use Fusion-360 for projects, problem is when I open a project for cut in Mach 3 is not complete or total rong and if I open the same project in Mach 4 is perfect the same like in fusion 360, my question is I can use this controller for Mach 4?