Messages

1

Third party software and hardware support forums. / Re: Command set for NVUM CNC Controllers ?

« on: November 01, 2017, 06:09:00 AM »

... as can Dynamotions KFlop.

That's an interesting controller. Thanks for pointing me to it!

Michael

2

Third party software and hardware support forums. / Re: Command set for NVUM CNC Controllers ?

« on: November 01, 2017, 05:32:20 AM »

One more question. Are there any other controllers available with the following specs:
Input: Serial or USB, with a well documented command set, for selfmade software.
Output: 6 or more channels, pulse and direction signals, and a few inputs for end switches.

Thanks,
Michael

3

Third party software and hardware support forums. / Command set for NVUM CNC Controllers ?

« on: November 01, 2017, 05:04:07 AM »

Hi all,

my question is not about a CNC machine, but about a 6-axis robot. I want to build the robot myself and write my own software to control it.
Now I've found these NVUM CNC controllers:
https://de.aliexpress.com/item/EU-Delivery-CNC-Controller-6-Axis-NVUM-200KHZ-MACH3-USB-Motion-Control-Card-for-Stepper-Motor/32829440105.html?spm=a2g0x.10010108.1000016.1.7b073759VvqN43&isOrigTitle=true

My question: It's clear that these controllers are designed for MACH3 software. Where can I find a documentation of the command set that these controllers will accept?

Thanks,
Michael