Messages

31

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 19, 2017, 09:26:11 AM »

OH Crap Thats Turn  I Just Noticed

32

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 19, 2017, 09:25:34 AM »

Thats what I Have...I Just renamed it to Billys ...I just double checked...I never gave it a name I guess....

33

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 19, 2017, 06:34:11 AM »

xml file attached and machine specs....Thanks Craig for taking a peek
Hi Craig...This is the Machine Specs
Effective working travel 275(X)mm*385(Y)mm*60(Z)mm
dimension 610x480*400mm
Max.workpiece dimension 70mm
Work table dimension 320mm*530mm
Frame materials aluminum alloy 6063 and 6061
Leadscrew 1404 double thread Trapezoidal screws
Driving units X axis 1404 trapezoidal screws
Y axis 1404 trapezoidal screws
Z axis 1404 trapezoidal screws
Sliding units X axis Dia.16mm chrome plate shafts
Y axis Dia.16mm chrome plate shafts
Z axis Dia.12mm chrome plate shafts
Stepping motor type 57 two-phase 1.8A
Spindle motor 400w dc motor 500~8000PRM/Min
Principal axis collet ER11 / 3.175 mm
Repeat accuracy 0.05mm
Spindle precision radial beat acuities 0.03 mm
Control unit triaxial one-piece drive + ring variable power + PWM speed
Carving Instructions G-code/.tab /.nc / .ncc/.txt
Communication interface through parallel port connection with computer
Software environment Windows 2000 / xp
Maximum speed 0-4000mm/min
Carving speed 300-2500mm/min (different materials differ)
Machine weight
28KG

34

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 18, 2017, 06:54:41 AM »

I will Do That....Thank you ! ! !....Noel, who used to work with us...Passed away...He was 82

35

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 18, 2017, 06:14:52 AM »

Yes Parallel port...I had a Wake to go to yesterday...

36

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 17, 2017, 11:38:37 AM »

I have to Double Check ...I believe...pin 5 & 14...I popped open the Control Box last week to take a look

37

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 17, 2017, 11:05:51 AM »

Thank you ! !  Every thing I looked at was saying something a bit different . ! ! !

38

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 17, 2017, 09:19:16 AM »

Would I come off the Power Supply...or off the Z Board...I have to assign it a PIN and a Low Out put...Just not 100% Sure and I would hate to blow anything up

39

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 17, 2017, 07:59:56 AM »

It has to intercept a signal to the stepper motor...correct?....

40

General Mach Discussion / Re: 3040T and Z Touchplate

« on: October 17, 2017, 07:58:10 AM »

Thanks but I am Looking for the Actual...Red Wire goes here, Black Wire Goes There...