Messages

251

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 05:58:58 PM »

ok tomorrow I will provide.
but current, or with ENABLE # 0  ??

252

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 05:45:17 PM »

yes, it's connected to the Mist.
Through ENABLE # 0 I could not control the relay ..!
Output1 is only activated / deactivated only with ENABLE / DISABLE in Mach4 and nothing else!
I did a lot of tests, but without result!

now they are no longer in front of the lathe.
when I was testing with ENABLE # 0, the screen was the same as yours, the only difference is that yours also has a port number.
my plugin only the pin number.
only difference is only in that.

253

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 04:50:05 PM »

Hi,
I simply copied and renamed the button you see in the image (copy button) and then entered in the main screen (the first image of the screen that I attached)
the internal logic of the button does not know it, in any case it is the original one of Mach4.
The current behavior of the "SERVO ON / OFF" button is this:
you press and the relay remains active.
press again the relay is deactivated.

P.S How is the quality of translation from Italian to English?

254

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 03:19:50 PM »

I only managed this way, but it works !!
Copy / paste the MIST M07 button and rename it.
when I press it I turn on / off the relay, so the servos go into ON / OFF mode.

255

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 07:18:12 AM »

maybe I understand how to do it, I create the on / off button on the screen where I activate the pin1 output.
update as soon as possible!

256

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 07:02:13 AM »

yes, yes, I had done that! only difference is that CSMIO has no port numbers, but only PIN. In my case it was PIN 1.
The relay connected to output1.
The relay is activated / deactivated only by Mach4 with enable / disable.
the m210 and m211 macros had no effect on output1.

on the CNC Italy forum I found this macro, can it be useful?
I attach the file.

257

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 04:08:25 AM »

it is very probable that I do not know how to do it.
I try to create a button on the screen and assign an output.

258

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 30, 2018, 03:21:43 AM »

Hi,
I was thinking... what do you think about using the physical switch to disable the servos?

259

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 28, 2018, 05:12:35 AM »

you understood and responded to my hopes on the Jog.

"If its the fact that the machine cant jog two axes at once that's because they can't."

for the CSMIO, I'm sure that soon they solve problems.
I thank you very much again! you are very kind person!
when I have news, I update the post!

260

Mach4 General Discussion / Re: Mach4 Button OFFLINE

« on: January 28, 2018, 04:13:35 AM »

absolutely no! they are very kind and helpful!
then I absolutely do not want to escapist possibility that I am unable to configure optimally!
in my opinion, there is only to be a bit of patience, and solve the problems, I find a serious company.
Rather..
I open only little off topic.
on the pantograph it has the SSE + C25.
I wanted to try out of curiosity Mach4.
I found myself faced with this problem.
I attach link video dropbox.
https://www.dropbox.com/s/zjhvt4z03yovjsn/20171102_090430.mp4?dl=0
sorry for in, bad english ..! i'm italian :-)
can you indicate me where to look for a pantograph solution?