1
General Mach Discussion / Re: UC300-5LPT port problem
« on: October 09, 2021, 03:27:15 AM »
ISSUE SOLVED.
The LPT5 unit works on port 1,2,3 whereas 4 and 5 were not tested. Plugin version 1.022
The smoking gun: one of the C11G BoB cannot communicate with the motion controller, for unknown reasons. The inputs of that board “see” status change and all LED indicators tell the user that the board appears functional and connected. There must be an internal broken link. Enjoy your WE.
The LPT5 unit works on port 1,2,3 whereas 4 and 5 were not tested. Plugin version 1.022
The smoking gun: one of the C11G BoB cannot communicate with the motion controller, for unknown reasons. The inputs of that board “see” status change and all LED indicators tell the user that the board appears functional and connected. There must be an internal broken link. Enjoy your WE.