Topics

1

General Mach Discussion / Drivers

« on: March 05, 2018, 11:19:08 AM »

During the operation these words were written"driver watchdog" in mach3.what is this?thanks

2

General Mach Discussion / change the coordinates

« on: April 07, 2017, 12:04:34 AM »

Hi,during the operations machine begins to change the cutting place and stops because of machine limit how  can l solve this problem,thanks

3

General Mach Discussion / too fast for pulleys...using max

« on: April 06, 2017, 02:45:11 AM »

Hi,during the operations these words are flashing "too fast for pulleys...using max"
how can l solve this issue?thanks

4

General Mach Discussion / switches

« on: March 26, 2017, 07:32:57 AM »

Hi,tell me please can l use one switch for homing and limiting at the same time?
thanks

5

General Mach Discussion / motors tuning

« on: February 13, 2017, 03:12:44 AM »

HI,l want to use SFU1604-3 model ballscrew with nema 34HS9840 motors.Please tell me steps per,velocity and acceleration.unit is mm.thanks

6

General Mach Discussion / About the motors

« on: February 05, 2017, 01:51:49 AM »

HI,l use 34hs9840 model motor.l want to know the maximum and minimum velocity per mm in motor calibration,l use mach 3.thanks