Messages

21

General Mach Discussion / Re: Spindle Control

« on: July 03, 2007, 04:00:51 PM »

Sorry it won't allow me to post the whole thing .

22

General Mach Discussion / Re: Shapes / Run from here ???

« on: July 03, 2007, 04:00:13 PM »

Has anybody splitted them up in single files , already? I mean I don't have to reinvent the wheel. Also is there a library with most used cuts for like Power Plugs/ DIN 5 / Switches etc most common used stuff ? Or is that all in Shapes ?? I haven't looked

23

General Mach Discussion / Re: Spindle Control

« on: July 03, 2007, 03:54:24 PM »

So here it is: I must say that the AUX on my board is always "HIGH" this is where I should hook up the spindle it's on PIN 1/PIN 2
 Also I have this board http://www.pminmo.com/wiki/index.php?title=DIY4axisinterface

Code: [Select]

<profile><Preferences><Syskey1>1</Syskey1><DefDir>C:\Program Files</DefDir><Profile>Proxxon MF 70</Profile><NewPath>0</NewPath><BR>0.</BR><BG>0.</BG><BB>0.</BB><FR>0.</FR><FG>0.</FG><FB>1.</FB><RR>1.</RR><RG>0.</RG><RB>0.</RB><AR>0.7</AR><AG>0.2</AG><AB>0.7</AB><ER>1.</ER><EG>1.</EG><EB>0.</EB><MatRed>0.</MatRed><MatGreen>0.1</MatGreen><MatBlue>0.1</MatBlue><PulseSpeed>0</PulseSpeed><ID>None</ID><FirstRun>1</FirstRun><LastUser>Demo V

24

General Mach Discussion / Spindle Control

« on: July 03, 2007, 01:31:41 PM »

I have a homebrew Interface where I have an SSR hooked up to control my spindle. In config/ports & pins  I've setup the spindle on pin 1 and direction on 2 ? which I changed to 1 back. I have active LOw enabled and in general Config I have the Spindel disabled unchecked . But I don't have pin 1 high when I start my work. Why is that ? Did I forgett something?

25

General Mach Discussion / Shapes / Run from here ???

« on: July 02, 2007, 05:41:57 PM »

OK here is my next question. When I load the "Shapes " demonstration and want to cut like he D.SUB 25pin further down on Shape 3 ..I go down there and click Run from here. But it ultimately jumps from the top and does only the first shape. Also how do  I view the shape it's only showing the first one. I do regenerate Toolpath but nothing.

26

General Mach Discussion / Re: Homing Z-Axis during G-Code process

« on: July 02, 2007, 05:04:39 PM »

Thanks guys ! Now it's behaving very bravely. This group is very nice thanks again. It was just a little button that I didn't know what it was for. But I'm getting the hang of it slow and easy. The Safe -Z was not enabled. But now it works like a charm. Great Product, great Support I'm glad I 've chosen this product.

 

27

General Mach Discussion / Homing Z-Axis during G-Code process

« on: July 02, 2007, 05:33:05 AM »

Hi I am New to the group and this is my first question. I have a converted Proxxon MF70 . All homing and Soft Limits are properly set up. Everything works my question is more this: When I am trying to Home in the middle of the G-Code processing the Z-Axis won't pull up    to 0 first leading to scratch the piece I was working on. Is there somewhere a way to tell it that when "Homing" is pressed the fist thing would be Zeroing the Z-Axis ?