Messages

11

CS-Lab / Re: how can i use cs labs inputs for brains?

« on: November 27, 2016, 02:28:45 AM »

the modbus adress "91" ist fix for the cs labs controller?

12

Show"N"Tell ( Your Machines) / Re: Bridgeport Series II CNC Retrofit "shopping list"

« on: November 23, 2016, 04:38:27 PM »

http://shop.cncdrive.com/index.php?productID=366

13

Show"N"Tell ( Your Machines) / Re: Bridgeport INTERACT

« on: November 22, 2016, 07:19:32 AM »

i received the machine yesterday.
its a interact 520 from 86/87 with analog endcoders and fanuc +-10v servo amps for spindlel and axis.

i think, the best way is a cs labs ip-a or dspmc-ip with analog outputs for the axis, and a heidenain 601 exe converterf for the encoders.
so i can replace  now the heidenhain 155  "plug and play" and the servors later.

14

Show"N"Tell ( Your Machines) / Bridgeport INTERACT

« on: November 17, 2016, 02:24:38 AM »

i bought a new toy with a heidenhain TNC155 controller.

which is the best ethernet motion conroller for mach3/4 and this milling machine?

ist it better to change to new AC type servos?

15

Show"N"Tell ( Your Machines) / Re: MIKRON WF3 RETROFIT

« on: November 16, 2016, 11:58:22 AM »

the first run with the new z-axis spindle.

16

Show"N"Tell ( Your Machines) / Re: MIKRON WF3 RETROFIT

« on: November 05, 2016, 11:48:50 AM »

yesterday i found the controller for the original dc motors in an hungary ebay shop.
160v and 30a
https://www.youtube.com/watch?v=No__uUdG1yY but not for  the csmio ip A
http://www.cncdrive.hu/shop/index.php?productID=459
http://shop.cncdrive.com/

the shop sells cheap spindles too.

17

Show"N"Tell ( Your Machines) / Re: MIKRON WF3 RETROFIT

« on: November 01, 2016, 10:17:30 AM »

i bought the 3205 spindles from smalltec, germany, but the spindels are micron/ukraine

http://www.micron.ua/en/products/ball-screws

i think, hiwin spindles are better qualitiy.

the spindles are longer than orignal.
i can send you drawings for the parts.

18

CS-Lab / how can i use cs labs inputs for brains?

« on: October 23, 2016, 09:01:35 AM »

how can i (direct) use a cs labs input for M3/4/5/8 or feedrate function with brains?

19

CS-Lab / Re: Motor tunning with CSMIO/IP-A (PID) Trouble with encoders

« on: October 23, 2016, 08:54:27 AM »

i switched the x and y axis now to belt-drive.
the pid tuning is much better than with  gears, but my spindle is not the best qualitiy.  
i think, with zero gap spindles it works perfekt.

https://www.machsupport.com/forum/index.php/topic,33125.msg232442.html#msg232442

20

Show"N"Tell ( Your Machines) / Re: MIKRON WF3 RETROFIT

« on: October 22, 2016, 08:00:18 AM »

i fitted the ball screws at the x and y axis, but the cheap micron spindels arent backlash free.

the pid tunings works now much better as with the old trapeziod spindles.

i changed today to the mach 3 62 version in an different folder.
how can ich transfer the cs labs settings to the new folder?
i have now problems to start the pid tuning, but the plugin works.