Messages

11

General Mach Discussion / Re: Tool Path Not Displaying Properly

« on: March 11, 2016, 02:10:47 PM »

12

General Mach Discussion / Re: Tool Path Not Displaying Properly

« on: March 11, 2016, 02:07:30 PM »

13

General Mach Discussion / Re: Tool Path Not Displaying Properly

« on: March 11, 2016, 12:13:59 PM »

Thanks for the prompt reply.

I went in config/general logic configuration and changed the IJ mode.  I tried both options (absolute and inc).  I regen toolpaths both times.  The only difference is that it displayed big swirls this time.

At no point does the display remotely even look like what it is supposed to.

Any other options would be greatly appreciated.  Thanks!

14

General Mach Discussion / Tool Path Not Displaying Properly

« on: March 11, 2016, 09:44:32 AM »

Hello everyone.

I'm new to this and am having issues getting started.  I recently bought a CNC machine and PC.  My PC is a Dell Optiplex 980 (refurbished).  Running Windows 7 Home (32-bit).  I am running a PNY non integrated graphics card.  Connected via parallel port.

I've installed the latest version of Mach 3.

Created g-code on my other computer and it displays properly in the tool path display screen (on that computer).  It is a Pontiac Firebird logo.

I load the g-code in Mach 3 on this PC and I get a very odd display...........a circle in one corner and an oval shape in another corner connected with the cut path.

I've also installed Mach 4 on this computer (though not using it) just to see if it displays properly.  And it displays properly in the toolpath display screen.

Any help would greatly be appreciated.

Thanks,

Chad