Messages

81

Post Processors / Re: Laser postprocessor

« on: May 13, 2019, 12:00:33 PM »

Thanks, Tweakie,

I have attached it as a ZIP file.

Chuck

Ps,
Again, thanks to Seth at Liberty machine, inc

82

Post Processors / Laser postprocessor

« on: May 13, 2019, 09:45:39 AM »

I would like to Attach a postprocessor Written by Seth At Liberty machines, Inc

It can be used for laser, waterjet, or plasma 

I tried the arc soft Plasma Postprocessor And it did not work for what I was doing. Seth agreed to write one and it works great.

I cannot attach it because it is a  .CPS file

Could somebody pls tell me where I can Get this post-processing File Recognized?

Thanks,
Chuck

83

General Mach Discussion / Re: post processor

« on: May 13, 2019, 09:37:40 AM »

Reuelt

I initially tried The MACH3 plasma PP For posting my laser Designs And it did not work. Seth From Liberty machine Wrote  this postprocessor Which Works great for what  I'm doing,



Chuck

84

General Mach Discussion / Re: post processor

« on: May 13, 2019, 03:10:23 AM »

Thanks Teeakie , I knew I saw it somewhere.

 The post processor was developed by Seth, owner of liberty machine.
He wrote it  at my request and it works great on Mach3 from designs  created on Fusion 360 Laser,  water jet  or plasma cutting.

Chuck

85

General Mach Discussion / post processor

« on: May 13, 2019, 01:57:15 AM »

Where can I post a Postprocessor for Fusion 360 Laser Cutting?

Somewhere I saw a place For posting postprocessors But I cannot find it now.

Chuck

86

General Mach Discussion / Re: Mach3 Windows 10 update -- don't do it

« on: December 11, 2018, 12:32:57 PM »

Hi Tweakie,
Appreciate your input,.
 I have several  profile on this machine and I have tried  each of them with  The same ESS communication error message   

 So this sounds like somethings corrupt in the MACH3 code itself   I Suppose   

Chuck

87

General Mach Discussion / Re: Mach3 Windows 10 update -- don't do it

« on: December 10, 2018, 01:56:50 PM »

 Group,
Wel,l after getting my laser up and running perfectly using the M 10 and M 11 commands  with windows 10 ,  I went to use my machine   The other day and got an error message that the ESS (warp9) was not communicating with Mach3.

  Andy from warp9  thinks MACH3 is corrupted  and needs re-installed.

  I want to be sure I reinstall MACH3 correctly  considering the difficulty I had getting everything working properly.

 I presume I take the following steps

1.  Back up my XML files, 

2.  using the windows uninstall method, uninstall my current MACH3.

3.  Reinstall MACH3

 Is there anything else that needs to be done?

 Also, any ideas why I got this “communication problem“   Between MACH3 and WARP9 ?

Thank you,
Chuck

88

General Mach Discussion / Mach3 laser

« on: November 28, 2018, 03:17:38 PM »

I am using Fusion 360 “Laser cutting” CAM options.

When I try to post process the normal MACH3 mill does not work properly.

After some researching found information that shows ARTSOFT
Has a Fusion 360 post processor for MACH3 Laser.

What does it take to get this postprocessor included in the Fusion 360 postprocessor list?

Thanks,
Chuck

89

General Mach Discussion / Re: Mach3 on a laser cutter...

« on: September 20, 2018, 11:22:06 AM »

 Hi   Tweakie,
 I now have my laser “cutting” very welll.    I was not aware that Mach3   Could be used for engraving.  So I am very interested in your comment, “ I should perhaps mention that engraved items, such as this tree image (330mm x 280mm) can easily be laser reproduced by either Mach3 or Mach4 without generating (or using) any Gcode at all”.

 Could you point me to where I can learn more about this  process ?
Thank you,
Chuck

90

General Mach Discussion / Re: cutting a spiral

« on: September 17, 2018, 03:22:02 PM »

 As it turns out Brian wrote a wizard for cutting spirals in Mach3
Chuck