Hello Guest it is June 01, 2023, 01:04:22 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - wakedabed

Pages: « 1 2 3 4 5 6 7 8 9 »
Show"N"Tell ( Your Machines) / Re: Large Oxy Profile Cutter
« on: March 30, 2015, 10:47:26 AM »
Here is the new machine that I have started to making!

Show"N"Tell ( Your Machines) / Re: Large Oxy Profile Cutter
« on: March 30, 2015, 10:27:38 AM »
Hello guys,
My name is Abed from Israel , 6 mounths ago i have started with cnc world. or with mach3 lets say ;)
I have maked a small cnc plasma machine with very standard parts, like TB6560, nema 17, all things were very standard, and i have succeeded with it to cut many pieces and many complicated pierces also.
The very improtant thing for me was that i have succeeded to run the machine, to know many things on mach3, vb, or scrren set, or macro, ok i cant say every thing on mach3 but many principles things!

Now I have started with the next table, it's 2.2m×1.1m

General Mach Discussion / Can Mach3 control 3 Relay Switches?
« on: March 26, 2015, 03:19:57 AM »
Hello there,

I would to ask if there are some option or way to control 3 Relay switches on Mach3?

And which board I need to use?

Thanks so much!

General Mach Discussion / Re: Oxy Fuel preheat time in Mach3
« on: March 25, 2015, 04:39:00 AM »
You can use one DRO and make one equation between the pierce delay and time to wait preheat! It's more usefull ;)

Hello guys,

can someone please explain to me what it's mean this code exactly?

Call setdro(2,piercehight)

Thanks so much!
Best regards!

General Mach Discussion / Which is the best breakout board for plasma!
« on: March 15, 2015, 12:06:59 PM »
Hello people

I need to need which is the best breakout board for my cnc plasma machine?
I have searched on the ebay and I can't know which board to choice!

Thanks so much!
Best regards!

General Mach Discussion / Re: Modify A Macro File Throuht A Screen!
« on: March 11, 2015, 06:30:53 AM »
What a nice reply!! Thanks so much brother!!
So amazing this program!

General Mach Discussion / Modify A Macro File Throuht A Screen!
« on: March 11, 2015, 04:27:12 AM »
Hello guys

I want to ask you if there are someone to tell me how i can change an integer on a macro file from the main screen?
For ex. i have on an macro file an integer for time (sleep 1000), in all my work project this integer is the same time, now i want to change it every time i want to enter Mach3 without to open it from the main menu, i want to change it through the main screen.

Can someone help me please?

Thanks so much!

Ok Grouchy,
First of all, thanks for your reply and your care about my machine.
Let's see what i have, first, if i didnt have ground to my machine, and on my table, and to my PC that i use to control the machine with Mach3, it's possiple that issues with the cable that heating due to the ground wire?

General Mach Discussion / LPT cable is heating sometimes!! Please to help!
« on: February 15, 2015, 04:44:39 AM »
Hello people,

I have finished my cnc machine, and every think it is ok, but i want to ask you why sometimes my LTP cable is heating! I didnt know why!
What about the ground wire that i have it on the supply power? I need to wire it somewhere on the machine?

Thanks so much!

Pages: « 1 2 3 4 5 6 7 8 9 »