Hello Guest it is March 28, 2024, 07:36:56 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - khaled

Pages: « 1 2
11
General Mach Discussion / Re: worm gear cad design
« on: December 24, 2013, 01:22:32 PM »
 :)Hi there man thankx a million for your support and the programme with explanations , i understand alot more now youve really helped me i will try it out soon and post to you my results.
one more query before i do is there any specific settings on Mach3 that i need to set ex: the degrees/min or anything for the 4th axis? or anything else on mach3 settings
Thank you again.

12
General Mach Discussion / Re: worm gear cad design
« on: December 23, 2013, 03:16:59 PM »
hi there thank you man you way too professional for me its great yes i see what you mean well sort off but i would like to make a double thread not variable sorry man im also not familiar with many of these phrase and codes but thank you so much for your great detailed explanations.
if i had to put in the g codes i posted to you will i achieve my result of the pictures i posted or can you please show me a small example of the details i sent you man this really tough for me im
 jusT at the start everything is so new
thank you very much
Kind regards Khaled

13
General Mach Discussion / Re: worm gear cad design
« on: December 23, 2013, 01:20:33 AM »
Hi there
Thank you so much for all your replies sorry went to sleep I think because of the time difference.
please im so sorry im very new to this I have no experience in this please bare with me,never did g codes before so really don't understand your method:-(
let me try and explain exactly what I need to do an please help.and does this mean that the g code programme I sent you is not correct ? and sorry im only used to mm measure
I would like to make a worm 2 float or 2 thread the lenghth would be 150mm
depth 6mm
the pitch 27mm
tool diameter 10mm ball end mill
so sorry man and thank you for your help

14
General Mach Discussion / Re: worm gear cad design
« on: December 22, 2013, 04:57:10 PM »
hi man thankx alot for your reply ;)
someone on cnc zone sent me a short G code example of what i want to do i never did g codes before this is my first time using G code on mach 3 so im still trying to wrap my head around it ;D here is a sample would you approve it
g21 g90
 m6 t1
h1 ( tool offset if your using it )
m3
 
{copy}
 
g1 z 50. f# ( move to above the part )
 g1 x0.0 y0.0 a0.0 f# ( note if a is moving father then x,y distance feed in deg/ min. )
 g1 z36. f# (depth of cut )
 g1 x-270 A3600 f500 ( this cut will make ten rev to - 270 @ 500 deg/min)
g0 z 75
g0 x0.0 a 0.0 ( back to start )

{end copy}
 {pasted}
 g1 z 50. f# ( move to above the part )
 g1 x0.0 y0.0 a0.0 f# ( note if a is moving father then x,y distance feed in deg/ min. )
 g1 z35. f# (depth of cut ) {change this Z for cut depth}
 g1 x-270 A3600 f500 ( this cut will make ten rev to - 270 @ 500 deg/min)
g0 z 75
g0 x0.0 a 0.0 ( back to start )

{end pasted}
 
m5 ( spindel off )

thankx alot

15
General Mach Discussion / Re: worm gear cad design
« on: December 22, 2013, 06:39:15 AM »
Hi there can anyone help me with G CODES FOR A 2 THREAD worm using ball end cnc milling its a 76mm diameter and the pitch is 27mm

16
General Mach Discussion / Re: Gear Milling
« on: December 20, 2013, 09:24:43 AM »
Hi thankx I do have a lathe but its too small so I got to do it on milling machine please someone help with just an example even to get me on track >:(

17
General Mach Discussion / Re: Gear Milling
« on: December 19, 2013, 01:22:29 PM »
hi there im new to this hobby im using mach3 cnc milling and would like to cut a worm gear using 4th axis how do i go about setting this or the codes please help
Thankx

Pages: « 1 2