Messages

51

General Mach Discussion / Re: Table is not in level?..... cnc3040

« on: December 01, 2013, 11:14:38 AM »

Here is the gcode:

( test )
( File created: sunnuntai, joulukuu 01, 2013 - 06:13 )
( for Mach2/3 from Vectric )
( Material Size)
( X= 200.000, Y= 150.000, Z= 10.000)
()
(Toolpaths used in this file:)
(Profile 1)
(Tools used in this file: )
(1 = Engrave {20' 0.02" Tip Dia})
N100G00G21G17G90G40G49G80
N110G71G91.1
N120T1M06
N130 (Engrave {20' 0.02" Tip Dia})
N140G00G43Z25.400H1
N150S8000M03
N160(Toolpath:- Profile 1)
N170()
N180G94
N190X0.000Y0.000F1200.0
N200G00X5.000Y5.000Z3.175
N210G1Z-0.200F480.0
N220G1X195.000F1200.0
N230G1Y145.000
N240G1X5.000
N250G1Y5.000
N260G00Z3.175
N270G00Z25.400
N280G00X0.000Y0.000
N290M09
N300M30

52

General Mach Discussion / Re: Table is not in level?..... cnc3040

« on: December 01, 2013, 10:58:42 AM »

They are all same, made by vcarve pro 6.0
Doing something wrong with vcarve?

53

General Mach Discussion / Re: Table is not in level?..... cnc3040

« on: December 01, 2013, 07:57:03 AM »

Hi,

Here you can see

http://youtu.be/57xY94SnlCQ
It is like when I'm moving the spindle so the deep is okay all the way, but when I'm using vcarve or gcode the spindle is going like the table aint in level...

Thomas

54

General Mach Discussion / Re: Table is not in level?..... cnc3040

« on: December 01, 2013, 07:33:35 AM »

And I use Vcarve 6.0

55

General Mach Discussion / Table is not in level?..... cnc3040

« on: December 01, 2013, 07:26:03 AM »

Hi,

I'm new with cnc and now i have a cnc3040.  The problem I have is that everything else is working fine but the Z axis is not....

When I'm cutting lets say a piece of wood 200mm x 150mm so on the right side it is much more deeper than on the left side...

Why is it so? I have used all the settings that came with the machine...

Thanx for your help, hope you understand me.

Thomas
Finland