Hello Guest it is March 28, 2024, 06:22:21 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SirFinland

Pages: « 1 2 3 4 5 6 »
11
General Mach Discussion / Change height for mach3
« on: March 10, 2014, 07:13:34 AM »
Hi!

How can I chnge the height in Mach3?

I'm using Vcarve and it's allways 25.4 for the Z How can I change that so it wont drill straiht in to the board?

Thanks!

12
General Mach Discussion / Re: CNC 3040 and Pocket tool path...
« on: March 06, 2014, 02:11:59 PM »
Hi,

Okay so I will change places for the steppers motors.

13
General Mach Discussion / Re: CNC 3040 and Pocket tool path...
« on: March 06, 2014, 06:34:32 AM »
Hi,

Thanks! Sorry I'm not so good at this English I'm a Finn ;)

What do you mean whit this "swapping drives around"

Thanks!!

Thomas

14
General Mach Discussion / Re: CNC 3040 and Pocket tool path...
« on: March 06, 2014, 03:56:48 AM »
Hi,

Yes I have done everything... but no help so far :(
Do you know what could be the right setup for it? All axels are okay...

Thanks

15
General Mach Discussion / Re: CNC 3040 and Pocket tool path...
« on: March 05, 2014, 10:57:35 AM »
Hi.....

I'm getting crazy... ;)

When I'm doing a pocket that is 120mm x 70mm it is okay I have less acc on X.

But when im doing a pocket with a text soit looks like this

And the settings i Have is
X 400 2000 160
Y 400 2000 200
Z 400 700  100

What is wrong? is it the Feed rate or plunge rate? Or something else??

Thanks!!!!!



16
General Mach Discussion / CNC 3040 and Pocket tool path...
« on: March 01, 2014, 01:54:59 PM »
Hi,

I'm having problems with my cnc3040 and VCarve pro 6.

When I do a pocket with a word in it so the first 0.5mm is ok but when it will start on 1.0mm layer so the letters are about 0,5mm to the right or left.

All setting are like the should be and nothing is loose on the machine!

Can some on please help me whit this and give mi some goood tips!!!

Thomas

17
General Mach Discussion / Re: How to make a Pocket RIGHT!!
« on: February 09, 2014, 11:19:26 AM »
Hi,
 
I have one off this and two other, because one was broke. Should they all be same?

Can this have something to do with the X axis?

Thanks!


18
General Mach Discussion / Re: How to make a Pocket RIGHT!!
« on: February 09, 2014, 06:30:51 AM »
Okay...
I'm new with this... Can you help me step by step?
It would be great!!!

19
General Mach Discussion / Re: How to make a Pocket RIGHT!!
« on: February 09, 2014, 06:20:24 AM »
Its a bit more to the left

20
General Mach Discussion / Re: How to make a Pocket RIGHT!!
« on: February 09, 2014, 05:58:58 AM »
It works Okay when I just engrave a word, but when I start to engrave a pocket so its okay on the left side off the pocket but not on the right side.

Settings for my CNC3040T-DJ

35000 MHz
   
    Steps    Veloci      Acceler    Step Pulse   DirPuls
X: 400      2000       200         3                  1
Y: 400      2000       200         3                  1
Z: 400       700        100         3                  1

Pages: « 1 2 3 4 5 6 »