1
General Mach Discussion / G82 Mach3 Lathe issue
« on: July 11, 2016, 10:03:14 AM »
Having some trouble getting the G82 peck drilling cycle to work on mach3 lathe. I have been through all the info/posts on here and everywhere but still it doesn't work (much to my frustration!!). I have G83 working fine on the machine, but with the G82 code below it seems like it just jumps over the G82 line. What's missing!? Thanks
G20 G40 G18 G90 G80 G54
G28
T404 ;16mm spot drill
S200 F20
M3 M8
G00 X0 Z1
G82 X0 Y0 R1 Z-20 P1000 L1 F10 G98
G80
G28
M30
G20 G40 G18 G90 G80 G54
G28
T404 ;16mm spot drill
S200 F20
M3 M8
G00 X0 Z1
G82 X0 Y0 R1 Z-20 P1000 L1 F10 G98
G80
G28
M30