Messages

31

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 08, 2013, 06:10:05 PM »

what is the name of plastic for cables

32

CS-Lab / tool setter

« on: November 07, 2013, 07:48:15 PM »

Hello

I never used the set tools  ....but have some questions ...  can i do that witch csmio and mach 3

i would every time when  mach3 ask me to change tools with windows pop (or similar processing ) to change tools manually   . After i change the tool and press ok .  The CNC go to tool setter  and continue the  process .

Thinks

33

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 07, 2013, 10:51:18 AM »

i find the error for 1 r/min   ... i measure  the outputs of encoders is 5V   ...you are the king .

Thinks 

34

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 07, 2013, 09:14:40 AM »

hi hood

my drivers when i apply 0v  he continue to run  with   1r/min  

35

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 07, 2013, 09:12:34 AM »

i ask  a Mitsubishi for voltage of encoders   : 5 to 24VDC based upon device it is connected to.  Maximum current 35ma.   

36

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 06, 2013, 06:52:35 PM »

how i can measure the outputs of encoders

37

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 06, 2013, 05:27:16 PM »

in drawing of encoder put differential output to GND analog  is it  ok        ?   differential output is = to gnd ?

38

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 06, 2013, 05:24:50 PM »

yes is work  one bit have error   parameter  no.0

39

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 06, 2013, 05:04:55 PM »

if you look in parameter n0.43 to 48    i set it in default .

40

General Mach Discussion / Re: MR-J2S-A and Mach 3

« on: November 06, 2013, 05:01:51 PM »

yes i can run the motor with software in Test -> JOG