1
Third party software and hardware support forums. / ESS + MB3 wiring help
« on: April 02, 2024, 09:35:24 AM »
Hi, I'm OK with most of the wiring to the MB3 but can't find an example for the index encoder.
I'm using a OMRON E6B2-CWZ6C Rotary Encoder, I need index Z and incremental A or B channel.
Here is the encoder pdf https://assets.omron.eu/downloads/latest/datasheet/en/q085_e6b2-c_incremental_rotary_encoder_40_mm_datasheet_en.pdf?v=8
Also the MB3 manual, it has every example except for a rotary encoder. I have posted on the cncroom forum but it seems dead.
https://cncroom.com/wp-content/uploads/downloads/MB3-Owner-Manual-E20R2.pdf
I want to run the encoder in Counter clockwise (CCW) mode, do I use A or B?
Any help appreciated
I'm using a OMRON E6B2-CWZ6C Rotary Encoder, I need index Z and incremental A or B channel.
Here is the encoder pdf https://assets.omron.eu/downloads/latest/datasheet/en/q085_e6b2-c_incremental_rotary_encoder_40_mm_datasheet_en.pdf?v=8
Also the MB3 manual, it has every example except for a rotary encoder. I have posted on the cncroom forum but it seems dead.
https://cncroom.com/wp-content/uploads/downloads/MB3-Owner-Manual-E20R2.pdf
I want to run the encoder in Counter clockwise (CCW) mode, do I use A or B?
Any help appreciated