Messages

21

General Mach Discussion / Re: Dro's do not match

« on: July 24, 2013, 06:37:22 PM »

Sorry to bother....But it's still doing it.

22

General Mach Discussion / Re: Dro's do not match

« on: July 24, 2013, 02:35:03 PM »

AWESOME THANK YOU! . Now it's turning to the right instead of left I don't see any reverse setting

23

General Mach Discussion / Dro's do not match

« on: July 23, 2013, 11:14:56 PM »

Hello All, I'am new
    I got everything moving, made a simple cut GCODE on in mach turn with the wizard, Have my part placed in chuck, and part zeroed to placement ....and movement but no cut. However: I do see that the DRO's are way off. Just trying to do a simple cut..VERY SIMPLE. I'm running DEMO so that might be the problem, or the Steps per under motor turn....I have them set to 8000 did I do the math wrong?

Set-up
SHerline 4000 lathe 20 TPI
KL4030 microsteppers set at 1/8th 200

Any help would be much appreciated.