1
General Mach Discussion / Re: Home ref all stepper stop when hit home/limit switch
« on: August 02, 2013, 09:49:29 AM »
Hi again
My system is a 24v system. I have seperated all AC wires from DC wires
I have just tried a NPN limit switch on the Z axis but i still have the same issue the motors not reversing off the combined home and limit switch
I am using a USB control board
I have orderd some sheilding singal and motor wires, but i am not sure this will help
I have tried setiing the motors to various speeds and acceleration valves but nothing changed.
So i am out of ideas and have found no other things to try from the web
My system is a 24v system. I have seperated all AC wires from DC wires
I have just tried a NPN limit switch on the Z axis but i still have the same issue the motors not reversing off the combined home and limit switch
I am using a USB control board
I have orderd some sheilding singal and motor wires, but i am not sure this will help
I have tried setiing the motors to various speeds and acceleration valves but nothing changed.
So i am out of ideas and have found no other things to try from the web