Messages

1

General Mach Discussion / How to set up my lathe with Mach 3 Turn

« on: July 03, 2013, 10:03:15 AM »

Hy,  Im new Mach 3 turn user and i couldn't set up my lathe. With Jogging is Ok but to set up the axxis and to corigate the real and program's measured units its something wrong. How can I set up the origin pont for the axes?
   Someone can help ME? Pls

2

General Mach Discussion / Re: Mach3 turn; jog third axis

« on: June 25, 2013, 01:52:55 AM »

Hy,
   I have a question/problem. I started to use Mach 3 turn for my turn machine.
   When I use manual joging on X axis just on a  determinated distance moves the cutting head. When i push the arrows, left or right the head is moving in diferent direction , even if i push in the appropriate direction.
    What you think about this???
Please help me!!!!

3

General Mach Discussion / Re: Doesnt work each axies!!!!

« on: June 06, 2013, 09:46:11 AM »

Finaly i found the problem. It was the pin numbers. for each motor i associated the common pin numbers but for me needed different, for ex. axie X 2 and 3 for me needed 3 and 2 that was.
    Anyway, Thank you for the fast reaction,
 All the best!

4

General Mach Discussion / Doesnt work each axies!!!!

« on: June 06, 2013, 05:24:57 AM »

Hy alls,
    In this period im preparing for my graduate exam. My proiect is a CNC turn machine and i want to use mach 3. I istallated but apeared a problem. When i tried manual mode just X axie is working, others doesnt work. The software shows me that its send semnals but the machine do noting. What would be the problem??? (I tested my driver in Kcam and its working well.)