Messages

211

Newfangled Solutions Mach3 Wizards / Re: New version of CopyCat, V1.1

« on: August 03, 2013, 08:22:10 AM »

Sorry that would be much more complicated than this wizard can do.

212

Newfangled Mill Wizard / Re: Tool Path Still Not Displaying

« on: July 31, 2013, 02:16:09 PM »

It is V1.0.11

Brian was supposed to out it on the web server yesterday, I dont know what has happened.

213

Newfangled Mill Wizard / Re: Tool Path Still Not Displaying

« on: July 30, 2013, 10:20:55 PM »

Just download it, click it to install. It will install the new version and it should run fine.

Wait, I see the version on the net is still 1.0.9 Brian was supposed to put 1.0.11 on the web today, but I see it hasn't happened yet.

214

Newfangled Mill Wizard / Re: Tool Path Still Not Displaying

« on: July 30, 2013, 08:29:24 PM »

That is interesting, I will have to point that out to Brian, he may have some clue from it.

215

Newfangled Solutions Mach3 Wizards / Re: New version of CopyCat, V1.1

« on: July 29, 2013, 07:02:07 PM »

CopyCat is part of the package called the mill add-os by Newfangled Solutions. One license, for $50 gets you the wizards, copycat, powerfeed and the NFSturn package.

see http://www.machsupport.com/software/mach3-addons-for-mill/

If you want to sell them as an OEM you will need to talk to Scott or Brian, try license@machsupport.com to initiate the discussion. We have done special packages for OEMs

216

Newfangled Mill Wizard / Re: Pointer to current version

« on: July 28, 2013, 03:10:30 PM »

Yes, changes were made to the license file for that version. You will have to contact license@machsupport.com and ask for a new license.

217

Newfangled Mill Wizard / Re: Tool Path Still Not Displaying

« on: July 26, 2013, 01:12:26 PM »

Ok, I found the problem. We were limiting feed rate to 1 decimal, but in this case the plunge rate was .01, so it got formatted to 0

We have been doing a major bit of cleaning up and should be able to post a new version to the web site later today, or tomorrow.

218

Newfangled Mill Wizard / Re: Tool Path Still Not Displaying

« on: July 25, 2013, 10:07:39 PM »

Ok that is what I need. I get the result you described on the latest build. I will look at this tomorrow, to late tonight.

219

Newfangled Mill Wizard / Re: Tool Path Still Not Displaying

« on: July 25, 2013, 07:54:07 PM »

Ok, the code error is on line 24 where a G1 is called with an F 0.0

I think that was fixed, but it may be in the latest V 1.0.11 that Brian has not yet posted to the web site.

I would still like to see the job file, not the Gcode. The job file lets me reproduce your settings and entry values exactly so I can see what you did to get there. Use the Save Job button.

220

Newfangled Mill Wizard / Re: edwardian script itc

« on: July 25, 2013, 05:20:43 PM »

Did you see the list of fonts at the bottom of http://ncplot.com/stickfont/stickfont.htm

There is not one named edwardian, but there are some old style. Sorry, I have no other source of fonts.