4791
General Mach Discussion / Re: GoTo Zero not working
« on: April 15, 2018, 04:44:17 AM »
Hi,
jogging is seldom at the fastest possible rate. It may be that your motors can jog at 50% of max but fail at 100%.
Screaming steppers have stalled. It is indicative that you have the speed too high for the steppers/drives/power supply, it is not a normal condition for Mach3.
Craig
jogging is seldom at the fastest possible rate. It may be that your motors can jog at 50% of max but fail at 100%.
Screaming steppers have stalled. It is indicative that you have the speed too high for the steppers/drives/power supply, it is not a normal condition for Mach3.
Craig