3401
General Mach Discussion / Re: Retrieving position after an e-stop or other position loss
« on: December 07, 2018, 12:56:57 PM »
Hi,
well then if you can read the accumulator then you should be able to do as you propose.
Servo drives with battery backed absolute encoders can report to the controller actual position at the time the drive
powers up, and can therefore maintain reference between sessions. That is not what you are proposing though is it?
Craig
well then if you can read the accumulator then you should be able to do as you propose.
Servo drives with battery backed absolute encoders can report to the controller actual position at the time the drive
powers up, and can therefore maintain reference between sessions. That is not what you are proposing though is it?
Craig