Messages

1

General Mach Discussion / Re: home limit switch problem

« on: April 14, 2013, 04:20:30 PM »

U are the best hood.  It was the noise settings in smooth stepper that did the trick.  I woulda never even thought of looking there.  My home works perfectly now.  Its amazing how nice having a home switch is.  I've been running without for a while and was just using the internal switches with turbotaig.  Its way nicer thru mach3.  

I gotta say, mach3 is the best money i ever spent.  

2

General Mach Discussion / Re: home limit switch problem

« on: April 14, 2013, 03:08:32 PM »

ahh that makes sense.  Let me try that and i'll report back. thanks.

3

General Mach Discussion / Re: home limit switch problem

« on: April 14, 2013, 03:05:08 PM »

I don't understand what you mean by external device.  Mach is a software.  Everything is external is it not?  And what plugin am I looking for?

4

General Mach Discussion / home limit switch problem

« on: April 14, 2013, 02:49:22 PM »

I know many people ask these types of questions and are referred to videos and search links.  But I've done my research and I'm still stuck.

Heres the issue.  The limit switch works fine.  I can see it in the diagnostics windows.  The Z home switch works just fine.  When I hit ref all , and the machine encounters the y axis switch, it hits the limit and stops instead of bouncing off and setting the home position.  Sometimes it will limit e-stop the system, sometimes it will go in the reverse direction after hitting the switch and keep going (ignoring all other switches and keeps going forever but slowly).   This is extremely frustrating. 

I am using the C10 breakout board with a smooth stepper running latest version of mach3.  I've set the debound to 8000 and doubling after every try all the way up to 640000.   The kernel is set for 100khz.   

What the heck is going on?  i'm extremely frustrated. what else can i try?  By the way the system is using an inductive switch found at cnc4pc and is set for active low.