Messages

231

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: March 03, 2015, 06:07:09 PM »

Ron:

   Sorry. My system has two version of Mach4, one is called wxMach4.exe , the other is wxMAch4GUI.exe, Ive heard of rare trouble
with wxMach4GUI that didnt happen in wxMach4.exe.

  Wasnt sure if my setup was uniqe to the developers package..

Art

232

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: March 03, 2015, 03:44:02 PM »

Ron:

  Im running 2247 with no issue.. But I have heard of thios type of lockup early on. Its strange that Darwin runs fine on its own, but locks up
after the config. The only fix I have heard for that is a removal of the profiles when it was a corrupted profile locking it up, I cant think of anything
in Darwin that I can test for that. Dos this happen with wxMach4 as well as  Mach4GUI?

Art

233

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: March 03, 2015, 10:21:12 AM »

Hi Ron:

   So you can jog the axis and see Darwin is running when you test it, but it hangs Mach4? Havent heard of troubles
like that in awhile. First, run the driver test and verify the version numbers on the Port selection screen. It should read
1.21 and under that 1.23 , are those the numbers shown?
   And what version of m4 is this? Lets see if we can figure out whats up...

Art

234

Mach4 General Discussion / Re: GSim Mach4 Material Removal Simulator

« on: March 01, 2015, 01:43:24 PM »

Hi Eldon:

 Glad to hear it works, must have just been an old version, I havent heard of anyone that cant run it with opengl version over 1.5

Art

235

Mach4 General Discussion / Re: GSim Mach4 Material Removal Simulator

« on: March 01, 2015, 12:37:58 PM »

This one?

236

Mach4 General Discussion / Re: GSim Mach4 Material Removal Simulator

« on: March 01, 2015, 12:37:19 PM »

Eldon:

  You DO have the appropriate OpenGL.. Open GL is in the video card and version 4.5 is great, very up to date.
Sounds like GSim doesnt work with your card for some reason. Is it the last GSim in the thread.. ?

Art

237

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: February 28, 2015, 08:47:04 PM »

 I always like the auto-fix's..

Art

238

Mach4 General Discussion / Re: GSim Mach4 Material Removal Simulator

« on: February 28, 2015, 08:45:29 PM »

Hi Eldon:

   Sounds like an error in you opengl initializing. Sim uses a vbo, not all graphics card have the capability. Any idea your OpenGL version?

Art

239

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: February 20, 2015, 10:20:09 AM »

Sage:

 Before you go further.. is your license being recognized? Darwin has no inputs unless licensed..
Check the system info in mach4 to see if the darwein module is being reported as licensed.

I do have a couepl reports of the Charge pump taking an extra press to get it running. Its not doing it here
at the moment, so Im not sure if its my bug or m4's bug. It may be mine. Ill schedule a check to see if
I can find it. I have no error reports on Darwin other than that one at the moment.. Homing etc is all tested
and verified as late as last week..

Art

240

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: February 19, 2015, 10:40:20 PM »

Sage:

  All the settings are kept in the profile folder in your machine.ini file...

Art