Hello Guest it is March 28, 2024, 10:58:36 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - ART

Pages: « 1 2 3 4 »
11
Video P*r*o*b*i*n*g / More hands..
« on: November 22, 2007, 12:58:20 PM »
Hi Guys

  Latest hands from testing.. one is dual strips and hgasd registration errors, but its getting there..

Art

12
Video P*r*o*b*i*n*g / alpha release of point generator..
« on: November 13, 2007, 01:35:53 PM »
Hi Guys:

  This will be the first release of the video prober.I cant do a video on it, my system chokes hard trying to use video and capture
video at the same time. SO heres the interface running, Ill explain how it works. This is pretty early stuff, but likely to take a long time
to complete, so you may as well play with it and see what you can do in terms of point clouds.. who knows, you may have fun..

Heres the interface running..

13
Sieg Machines / Welcome to the Sieg Machines forum
« on: November 11, 2007, 12:32:11 PM »
Hi All:

   Sieg machines are starting to use Mach3 more and more, so this board is started as a place to get specific
information on Mach3's interface to those machines. Hopefully, we'll have a Sieg owner moderate this forum.
ArtSoft has been in close contact with the Seig factory, and we will use this board for any pertinant information
for Seig owners as we recieve it. Please feel free to post any questions, or setup files for the Seig series of machines.

Thanks
Art

14
Video P*r*o*b*i*n*g / Photos of webcam scanner. ( no laughing.. :) )
« on: November 08, 2007, 09:18:31 PM »
Hi Guys:

  Here are some photo's , though grainy, of the "scanner" I made for this. Its a piece of wood with a laser pointer pressed in a drilled hole.
The angle of the hole was arbitray, ( my vise was at that angle..) , the plugin calibrates the angle and such with the 2" wooden block in one
of the photos. The laser takes 5 volts, taken from the red and balck wires in the webcam cable. The block of wood is then clamped with a
spring clamp to the upper or lower spindle trunion ring mounts depending on the FOV I want to shoot on.. ( I find higher makes the line sharper
and gives better results.. )  . As you can see, its a very expensive, very sensitive, very complex uint, likely as high as 50 bucks on the open market..

Art

15
Video P*r*o*b*i*n*g / my hand in points..
« on: November 08, 2007, 02:48:26 PM »
:) , dont try this with a mechanical probe..


16
Video P*r*o*b*i*n*g / First scan..literally..
« on: November 08, 2007, 10:57:45 AM »
Hi Guys:

  Well, its slowly taking shape.. Im using a webcan and a laser pointer, with a new plugin called VideoProbe.
Here is the first point cloud. ( Rememebr its early. :) , I just thought youd like to see the first scan.
It was taken in about 15-20 seconds, at about 4.5Million points per hour. Still rough, but I have yet to play some
math tricks to see if I can stabilise the outliers and average the readings for accuracy. Cool for a 20 second scan though..

Art

17
dspMC/IP Motion Controller / Welcome to the dspMC/IP board
« on: November 03, 2007, 08:36:44 AM »
Hi everyone:

  This board is for information fo the VitalSystems dspMC/IP motion controller. Its the place you can contact the designers and discuss any questions or issues
with this hardware.

Art

18
SmoothStepper USB / Welcome to SmoothStepper forum.
« on: October 22, 2007, 12:39:26 PM »
Hi All:

  Welcome to the smoothstepper forum. This group is moderated by Greg Cary , the inventor of the smoothstepper.
Its purpose is to ensure timely movementis done on any reported issues . SO list here any questions or issues that arise from the use
of a smoothstepper, or ask any questions pertinant to that device.
As of this entry, the SS is not released, but in preperation for Beta list users to have theirs delivered. 2-3 weeks projected
till that time.

 

19
Hi Guysd, this is a vectorArt 3d model that I cut to put in the stairwell of my house,
to overlook people as they walk down the stairs. I really like the artwork, took 40 minutes
with a 4.5mm ball mill in teak..
   I got the model from http://www.vectorart3d.com/ . They seem to have a talented sculpter..

Art

20
Share Your GCode / GCode Sharing
« on: July 11, 2007, 09:14:12 AM »
Hi Guys:

 I thought itd be a good idea to have a "Share the Gcode board", for when you have a sharp looking project youd like to share.
Ill start it off witha file I got for debugging. I cut it and it looks great. Please describe your files briefly, or provide a photo.

This one is a Royal Enfield Logo for Motor cycles. Nice pice, about 173 x 150mm's in size, 1mm deep.


Pages: « 1 2 3 4 »