Messages

11

G-Code, CAD, and CAM discussions / Re: Using M98 and M99

« on: December 15, 2016, 04:43:28 PM »

Hi, im not shure if it it will help and it is not fom me but translat it and giv a try!

Good luck

12

PoKeys / Re: Change or map axis on Pokeys57CNC

« on: December 11, 2016, 02:38:56 PM »

hello danilom,
i agree with you as long the switch has no dust on the contacts!
it is an simple solution but you can´t change your config in your nc if it is used.

13

PoKeys / Re: Change or map axis on Pokeys57CNC

« on: December 07, 2016, 06:30:54 PM »

An other kind of solution asked / is postet here:
http://www.machsupport.com/forum/index.php/topic,33581.0.html

also it means swap the axis ?! maybe an idea?!

14

Mach4 General Discussion / Head shift

« on: December 04, 2016, 12:41:56 PM »

Hello,
 where i can find informations about the head shift in mach4?
in the normal docs is not realy mutch to read about. 

15

PoKeys / Re: Change or map axis on Pokeys57CNC

« on: December 03, 2016, 06:01:56 PM »

When you like to swap tue axes it is released under Mach4.
With mach3 you can´t do that.
I know only switch on / off an axis over diffrent profiles.


look at the pulse engine document.

regards
Eurohoppel

16

PoKeys / Re: Change or map axis on Pokeys57CNC

« on: December 03, 2016, 05:26:46 PM »

Hello kiely,
do you realy use different Profile in mach3?
I use normaly on one Machine two Profiles: one for 3 Axis an one for the 4 Axis use.
I tried up one who i made the 4.th axis to the spindle so i could try out something as a late.

17

PoKeys / Re: HOW TO DETECT THAT IS RUNNING MACH3 IN POKEYS57CNC

« on: November 29, 2016, 04:21:25 PM »

Hello,
 just an example

18

PoKeys / Re: Pokeys ATC Macro

« on: April 21, 2016, 04:02:57 PM »

Hi Joe,

what´s about your Project?
Still workin?

Best Regards
Uwe

19

PoKeys / Re: Mach4 using 57E and kbd48CNC

« on: April 13, 2016, 04:25:31 PM »

hi,

i have used this combination for an maho600!
But under mach3.
you will find the documants for the kbd48cnc on the polabs homepage.
For an mpg under Mach3 you have to make the tick under "let pokey handle MPG jogging".
For this combination it is only important, that you don´t use the Pulse Engine.
Good luck

 

20

Mach4 Toolbox / Re: Lua scripting manual has been removed, use the Mach4 API help file

« on: April 07, 2016, 06:28:36 PM »

Hi all,
 when you have problems with docs you can use maybe this to handle:
http://www.helpndoc.com/

Regards
Uwe