1
General Mach Discussion / Mach3 Lathe - Can't Cut Straight 45 degree Angles
« on: March 16, 2015, 04:11:40 PM »
All,
I've upgraded my DM-300 lathe to mach 3. There are irregularities when cutting 45 degree angles (see attached pic). I thought the problem was hardware, but thought it maybe mach3 when looking at the cut preview window (see neon highlighted area in pic). The cut part looks EXACTLY like this. I tightened everything on the machine just to make sure and it is still occurring.
Anyone ever run into something like this before?
Software version is 3.043.066.
Thanks Guys!
I've upgraded my DM-300 lathe to mach 3. There are irregularities when cutting 45 degree angles (see attached pic). I thought the problem was hardware, but thought it maybe mach3 when looking at the cut preview window (see neon highlighted area in pic). The cut part looks EXACTLY like this. I tightened everything on the machine just to make sure and it is still occurring.
Anyone ever run into something like this before?
Software version is 3.043.066.
Thanks Guys!