6

« **on:** December 26, 2012, 03:36:35 PM »
i have a DRilling machine,in that machine according to g codes,first the X-Y table moves then the Z axis comes down and drill the hole in wood in one shot.the problem is that it takes too much time,around 5 holes in 2 sec,if i can make x,y z all the axis moves in one go then i can save much time,but for drilling application ,first the wood piece should be in position then drill,

If there is a procedure for non cordinated move then high speed can be achieve,as the drill moves out of the hole the table should start moving and reaches its other position before the drill re enters the wood on the same time drill is also moving.

Can anybody help ?...

in my machine Z axis works as on one full rotation drill comes down and goes up,so on increasing the z axis means drilling and retracting in one move

my g codes are

G0 X0.0 Y0.160

G0 Z1

G0 Y0.5105

G0 Z2

G0 Y0.8610

G0 Z3

G0 Y1.2115

G0 Z4

G0 Y1.5620

G0 Z5

G0 Y1.9125

G0 Z6

G0 Y2.2630

G0 Z7

G0 Y2.6135

G0 Z8

G0 Y2.9640

G0 Z9

G0 Y3.3145

G0 Z10

G0 Y3.6650

G0 Z11

G0 Y4.0155

G0 Z12

G0 Y4.3660

G0 Z13

G0 Y4.7165

G0 Z14

G0 Y5.0670

G0 Z1

G0 Y5.4175

G0 Z16

G0 Y5.7680

G0 Z17

G0 Y6.1185

G0 Z18

G0 Y6.4690

G0 Z 19

G0 Y56.8195

G0 Z20

G0 X0.375 Y6.9199

G0 Z21

G0 Y6.5578

G0 Z22

G0 Y6.1957

G0 Z23

G0 Y5.8336

G0 Z24

G0 Y5.4715

G0 Z25

G0 Y5.1094

G0 Z26

G0 Y4.7473

G0 Z27

G0 Y4.3852

G0 Z28

G0 Y4.0231

G0 Z29

G0 Y3.6610

G0 Z30

G0 Y3.2989

G0 Z31

G0 Y2.9368

G0 Z32

G0 Y2.5747

G0 Z33

G0 Y2.2126

G0 Z34

G0 Y1.8505

G0 Z35

G0 Y1.4884

G0 Z36

G0 Y1.1263

G0 Z37

G0 Y0.7642

G0 Z 38

G0 Y0.4021

G0 Z39

G0 Y0.04

G0 Z40

G0 X0.750 Y0.0

G0 Z41

G0 Y0.3665

G0 Z42

G0 Y0.7330

G0 Z43

G0 Y1.0995

G0 Z44

G0 Y1.4660

G0 Z45

G0 Y1.8325

G0 Z46

G0 Y2.1990

G0 Z47

G0 Y2.5655

G0 Z48

G0 Y2.9320

G0 Z49

G0 Y3.2985

G0 Z50

G0 Y3.6650

G0 Z49

G0 Y4.0315

G0 Z48

G0 Y4.3980

G0 Z47

G0 Y4.7645

G0 Z46

G0 Y5.1310

G0 Z45

G0 Y5.4975

G0 Z44

G0 Y5.8640

G0 Z43

G0 Y6.2305

G0 Z42

G0 Y6.5970

G0 Z41

G0 Y6.9635

G0 Z40

G0 X1.125 Y6.9199

G0 Z39

G0 Y6.5578

G0 Z38

G0 Y6.1957

G0 Z37

G0 Y5.8336

G0 Z36

G0 Y5.4715

G0 Z35

G0 Y5.1094

G0 Z34

G0 Y4.7473

G0 Z33

G0 Y4.3852

G0 Z32

G0 Y4.0231

G0 Z31

G0 Y3.6610

G0 Z30

G0 Y3.2989

G0 Z29

G0 Y2.9368

G0 Z28

G0 Y2.5747

G0 Z27

G0 Y2.2126

G0 Z26

G0 Y1.8505

G0 Z25

G0 Y1.4884

G0 Z24

G0 Y1.1263

G0 Z23

G0 Y0.7642

G0 Z22

G0 Y0.4021

G0 Z21

G0 Y0.0400

G0 Z620

G0 X1.5000 Y0.1600

G0 Z19

G0 Y0.5105

G0 Z18

G0 Y0.8610

G0 Z17

G0 Y1.2115

G0 Z16

G0 Y1.5620

G0 Z15

G0 Y1.9125

G0 Z14

G0 Y2.2630

G0 Z13

G0 Y2.6135

G0 Z12

G0 Y2.9640

G0 Z11

G0 Y3.3145

G0 Z10

G0 Y3.6650

G0 Z9

G0 Y4.0155

G0 Z8

G0 Y4.3660

G0 Z7

G0 Y4.7165

G0 Z6

G0 Y5.0670

G0 Z5

G0 Y5.4175

G0 Z4

G0 Y5.7680

G0 Z3

G0 Y6.1185

G0 Z2

G0 Y6.4690

G0 Z1

G0 Y6.8195

G0 Z0