Messages

21

G-Code, CAD, and CAM discussions / Re: Digitizer output comand?

« on: November 04, 2012, 12:54:22 AM »

If I manually "trip" the probe input via hotkey, it should record the current position... right?
What makes the choice to record the Encoder DRO or the Machine postion DRO ?

22

G-Code, CAD, and CAM discussions / Re: Digitizer output comand?

« on: November 03, 2012, 08:45:11 PM »

Ok, that opens a file... but what do I use to write the current encoder position DROs to a line in the file?
 

23

Show"N"Tell ( Your Machines) / The guillotine, Mach3 4axis digitizer and Kinect scan rig.

« on: November 03, 2012, 03:17:42 PM »

One of those projects that strats with left-overs from other projects...
















Next step is to add encoders and a bigger/heavier rotary table as I want to scan/digitize complete car engines.

24

G-Code, CAD, and CAM discussions / Digitizer output comand?

« on: November 03, 2012, 03:00:13 PM »

Is there a macro/command to output the current XYZ and A/4th encoder DROs to a txt file?
Built a large digitizing machine and want to update a file to read into ACAD.
If not can somebody post an example macro?