Hello Guest it is January 19, 2022, 09:21:33 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - W.Jansen

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 »
11
LazyTurn / Re: LazyTurn
« on: March 29, 2009, 10:39:17 AM »
Hi Zeeschuim

Those guys are way ahead of me.
Before I could react the problem is already solfed.

Greetings:
Willem

12
LazyTurn / Re: LazyTurn
« on: March 29, 2009, 05:55:55 AM »
Hi Zeeschuim

Send your DXF , maybe there is something wrong with it.

Greetings:
Willem

13
LazyTurn / Re: LazyTurn
« on: February 28, 2009, 03:41:58 PM »
Hi Art

Thanks for the excellent work so far.
In my case your time is very well spent.
As you can see in the time you are working on Lazyturn there are more lathe people coming that use A lathe.
As the program is growing there are more people to come be course you make A program that people can use and is affordable so it will become possible and fun to work with A lathe.

Thanks again and greetings:
Willem

14
LazyTurn / Re: LazyTurn
« on: January 18, 2009, 06:37:32 AM »
Hi Chip

Did A bit more testing and the king grahm works if I use A tooltip of 0.01 mm.

Greetings:
Willem

15
LazyTurn / Re: LazyTurn
« on: January 18, 2009, 06:10:37 AM »
Hi Chip

I used the same tools and settings in the new and the old version but the new version needs A lot more time to make A toolpath.
If i load your king grahm from post #791 I get only errors .
From your objects out post #795 only one works and even in that one I get no good toolpath.


16
LazyTurn / Re: LazyTurn
« on: January 17, 2009, 10:03:04 AM »
Hi Art

This version is A very long time busy greating A toolpath.
After A while the program hangs.

Greetings:
Willem

17
LazyTurn / Re: LazyTurn
« on: January 11, 2009, 02:31:03 PM »
Hi guys

I learn every time A bit more.
Your input puts me on A higher level, thanks for that.

Rich

Yes indeed, when i explode the polyline it works but it remains A riddle why the file is corrupt just when relocate just that one pointer because if I relocate the same pointer back nearby where it is coming from the file loads fine.

RC

Your file loads fine, if I open it in Autocad I see that the polyline is exploded just like Rich recommended.

Art

This is to technical for me but YOU understand what is going on And that is important for the development of Lazyturn.
I am glad that I follow the Lazyturn tread from the start so I pick up all the ins and outs.

Greetings:
Willem

18
LazyTurn / Re: LazyTurn
« on: January 11, 2009, 11:03:22 AM »
Hi Rich

Here are the dxf files.
the screenshots you see in previous post are without any tools loaded, just the dxf.

Greetings:
Willem

19
LazyTurn / Re: LazyTurn
« on: January 11, 2009, 09:35:44 AM »
Hi Rc

But there is another  funny thing.
Look what happens if I just replace  pointer "A" in the dxf.
How is this possible

20
LazyTurn / Re: LazyTurn
« on: January 11, 2009, 05:47:06 AM »
Hi all

I think it is this part of the dxf that is not good.
Play with this part and you get te most funny thinks.

Greetings:
Willem

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 »