1
Mach4 General Discussion / Cutting corners, Mach4 versus Mach3
« on: September 25, 2023, 02:32:21 PM »
Please help. I am just about to return to the ever working Mach3. Here is the problem:
I make my drawings with Fusion 360 and the G-code with V-carve pro 6.5
I have drawn a simple square of 100 x 100 mm. Sharp corners. The router is Ø 2mm.
When i cut with Mach3 i get corners with a radius of 1mm.
Making the same cut with Mach4, the corners have an radius of about 7mm.
Best regards
Poul
I make my drawings with Fusion 360 and the G-code with V-carve pro 6.5
I have drawn a simple square of 100 x 100 mm. Sharp corners. The router is Ø 2mm.
When i cut with Mach3 i get corners with a radius of 1mm.
Making the same cut with Mach4, the corners have an radius of about 7mm.
Best regards
Poul