Messages

31

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:07:23 PM »

should it be set to 45k in the ports and pins or at the driver test diag
also im not sure what your asking for by the time in INT

32

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 05:52:41 PM »

its set to the recommended 25000
no its around 36-40
so the kernal should be set to around the amount the driver test indicates?

33

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 04:38:01 PM »

runs way smoother now,
and still did a step and still only on the x axis but the step is now aboutu .015
should i not expect to get it any better
this is a 750 chinese machine

its just od the y and z are dead on only my x has been the issue
should i expect to get perfection from such a cheap machine or do you think this is as good as it gets
for what ive got

34

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 04:21:15 PM »

flat as aboard

mine does not have a spindle encoder so i have to manually turn it on and its gives me no idea of the actual rpm
its pure guess work
ill do another test run and report the results

35

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 03:48:39 PM »

a second and third test says system excellent

36

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 03:26:35 PM »

driver test says pulsing too fast

37

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 02:19:06 PM »

its windows 7
and a desktop

38

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 01:46:00 PM »

okay the driver test will not start
and i have not optimized the computer for mach, what will that take

39

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 01:40:51 PM »

wow thats alot, never knew about a driver test
will do that
dont know about the quicktime
no binding i cleared that before ever setting it up with mach
im only doing about 10ipm and if it cant run at that speed im in trouble
no cutter comp
also another thing i forgot to ask about is that

will let me offset my xyz or use cutter comp, ive been looking but not finding

40

General Mach Discussion / Re: G01 Arc no arc?

« on: July 28, 2012, 01:24:27 PM »

g1 linear
g2 clockwise
g3 counterclockwise
i used to program by hand till i learned cad cam
now id rather skin a cat than write a program by hand