Messages

21

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:45:04 PM »

Strange, try setting back to 25K and see
Hood

my control box was off at the momnet,
it will jog now at 60k and motor pulses at 5

22

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:41:03 PM »

well now setting my pulses to 5 in motor tuning it moves in the dro but the machine will not jog even when pulses are set at 2


woops nevermind, my control box was off
hah

23

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:33:01 PM »

r3.042.04
in motor tunning xyz are all set to 2

24

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:31:46 PM »

and finally in ports i went to 60k and diags read 59k

is that where i need to be, 60k kernerl in my ports and pins?

25

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:30:05 PM »

so i changed in ports and pins to 45k and restarting mach diags read 48 much closer

26

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:28:30 PM »

now my ports and pins are 35k and diags read 41 6k diff
previously at 25k in ports and pins diags read 33 around 8k diff

27

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:24:21 PM »

correct

28

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:21:48 PM »

alright
i saw it said if kernel speed changed i must retune motors
is that true

29

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:15:35 PM »

25k

30

General Mach Discussion / Re: NEW WITH MACH, HAVING ISSUES

« on: July 28, 2012, 06:12:27 PM »

o okay sorry i was giving you the readings from the driver test

okay on diagnostics page time in INT +4.6
PULSE FREQ 33k