1
General Mach Discussion / Re: sudden onset of Stepper stalling
« on: March 11, 2017, 03:38:17 PM »
I had a problem very similar except with the " y" axis...turned out the coupler between the stepper motor and the lead screw was loose.
Back and forth movement of the motor eventually caused it to loosen...I took the set screw out, put on some locktite, and really tightened it down...no more problems.
Hope that helps
Back and forth movement of the motor eventually caused it to loosen...I took the set screw out, put on some locktite, and really tightened it down...no more problems.
Hope that helps