Hello Guest it is May 07, 2021, 09:31:52 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - andreroest

Pages: 1 2 3 4 5
1
LazyTurn / Re: Problems starting up with lazyturn
« on: February 01, 2016, 01:51:44 PM »
 :)Rich nd Mike,

Thank for your help.
Finally it works the only thing Im yet facing is that in the rel world the settings doesnot correspond.
1mm equls in mach3 now 0,05 mm so that the machine blocks t the end.
Il have to find this out because manul control and wizrds are working well.

Kind regrds,
ndre

2
LazyTurn / Re: Problems starting up with lazyturn
« on: January 31, 2016, 06:37:33 AM »
yes I have installed that one

3
LazyTurn / Re: Problems starting up with lazyturn
« on: January 31, 2016, 06:26:48 AM »
this is a photo after trying toolpath>>fine path >> OK
Gives a failure

4
LazyTurn / Re: Problems starting up with lazyturn
« on: January 31, 2016, 05:46:30 AM »
Rich,

Do I have still the wrong version then?
My version is stated with: LazyTurn Alpha 1.1 Copyright (C) 2008

In this version there is no button Fine Path in the toolbar.
The ony thing is that you can click toolpath>>Fine path >> and when I click on OK then a statement is shoen ! Not yet implemented Stop clicking me! ..:)

Seems to be a pre version 1.1??

Kind regards,
Andre

5
LazyTurn / Re: Problems starting up with lazyturn
« on: January 30, 2016, 12:49:30 PM »
 :D Rich,

It is working like this!! Thank you for all your help that I received from you.
I have only one question left.
I saw that in lazyturn 1.1 the fine toolpath was skipped while in version 1.0 it was still in.
Was it skipped because in version 1.0 it was not working in the right way or can I still use version 1.0 instead of 1.1?

Kind regards,
Andre Roest


6
LazyTurn / Re: Problems starting up with lazyturn
« on: January 28, 2016, 04:58:03 PM »
Rich,

I installed lazycam 3.00.2 and lazyturn 1.1 now the toolpath is visible (roughpass only) the simulation works BUT the after clicking PST the only gcode which are shown is : Firts post en G20 ----nothing else the saved file remains empty.
The right working space shows:
LazyTurnProject
tonrond.dxf
Stock diameter: 7.8202
Start Stock Volume : 367.970 mm^3
Display in diameter mode
Display in mms

Toolpath
Rough profile
perPass : 0.1000
Feedrate : 1000
Tool: TOOL 1 -R0.5000-IC4.000
Toolpost#: 1

Thats all
Fine pass not in the upper toolbar and when you click on Toolpath > fine path it gives a comment that it is not implemented.

Any idea what is wrong??

Kind regards,
Andre

7
Anyone around which can sent me a gcode for the barrell type for a cilinder of 34 mm at a length of 70 mm and a radius of 100 mm??
i tried lazy turn but that does not work for me.(no postcode made)

Kind regards,
Andre

8
LazyTurn / Re: Problems starting up with lazyturn
« on: January 28, 2016, 04:02:10 AM »
Rich,

Lazycam is version 3.0 and lazyturn is version alpha 1.1
Are these the latest ones?

Kind regards,
Andre

9
LazyTurn / Re: Problems starting up with lazyturn
« on: January 27, 2016, 06:53:00 PM »
Rich thanks for your answer again.
I installed lazyturn directly out of the download area of mach3.
I suppose that that is the best (and latest) one to install.
Perhaps it is best that I try  it again on a computer with windows 7 OR xp on it.

I have the funny idea that I am still doing something wrong.
Is it possible that i can report to you by a photograph every step I make and perhaps you can recognize a mistake I make.
(the only problem is that every photo represents 3,5 Mb so that I have to sent it to you in perhaps 10 separate replies.)
Or is there another way to deal with this?

On forehand thanks for your help

10
I have tried to implement a barrell with the help of the OD3 wizard for turning.
I wanted to make a barrell shape from a 70 mm long cilindrical piece with a diameter of 34 mm.
The rounding of the barrell should be by a rdius of 100 mm.

Unfortunately it gives a failure to implement this because it seems that the max radius of the wizard OD3 is only half the length which means not bigger then 35 mm.

it is unclear to me why this is so restricted since a barrell form should be possible to implement.

Anyone has a solution for this??

kind regards,
Andre Roest

Pages: 1 2 3 4 5