Messages

11

Mach SDK plugin questions and answers. / how to work the jcode recording plug in?

« on: November 14, 2012, 04:33:34 PM »

hi from france, someone can explain me how it work?

http://www.machsupport.com/plugins.php


because i need a plug in for recording a gcode, with the jog (motion for arm robot)7

thanks

12

VB and the development of wizards / how to modify copycat?

« on: February 08, 2012, 10:58:06 AM »

hi, for my application, ans maybe for the your, i want finish the copycat wizard

because actually copycat write only 3 axis in the gcode (xyz), but mach3 work with 6 axis independant


i want modify copycat for write 6 axis in the gcode

but where find the file for modify this function?


someone can help me?

thanks

13

VB and the development of wizards / Re: search function edge finder for XYZABC

« on: February 04, 2012, 03:43:58 PM »

bonjour, how work the g31 function?


we need to put wire on the tool, wire on the table, and when the tool touch the table, that create a stop and we can "calibrate" a 0 point for this abscisse, it s an exemple?


i search this function for my small mill

14

VB and the development of wizards / Re: How to add new hotkey?

« on: January 25, 2012, 02:48:22 AM »

Thanks and you know how to modify copycat wizard? For write the 6 axis in the g code

15

VB and the development of wizards / Re: search function edge finder for XYZABC

« on: January 25, 2012, 02:47:25 AM »

Thanks and you know howto modify copycat wizard? For write the 6 axis in the g code

16

VB and the development of wizards / Re: How to add new hotkey?

« on: January 25, 2012, 02:38:21 AM »

6 axis

17

VB and the development of wizards / Re: search function edge finder for XYZABC

« on: January 24, 2012, 11:48:30 AM »

It was for find the 0 point ( homing for me)

Because each axis can work with -150/+150 degree (not mm)

Without encoder i need to find the 0 point exactly


G31 work for all axis?

18

VB and the development of wizards / How to add new hotkey?

« on: January 24, 2012, 02:26:35 AM »

Hi how to add hot key for modify the speed rate with the keyboard?

Thanks

19

VB and the development of wizards / Re: search function edge finder for XYZABC

« on: January 24, 2012, 02:22:22 AM »

Nobody for help me?

20

VB and the development of wizards / search function edge finder for XYZABC

« on: January 20, 2012, 05:44:39 AM »

hi every body

i try to modify the 6axis screen with mach3screen, for apply with robotic

i have find the function for X and Y

but i want add for ZABC


because i want use mach3 with arm robot (6 axis)


this function can help me for calibrate each axis at the 0 co-ord at each cycle

and adapte the speed for this function (not too slow)



and how to use this function in g code


exemple
after the cycle
call edge finder for x
after y
after z
....

for calibrate step by step each axis



sorry i m not programmer, but i can explain at my friend your solution