Hello Guest it is March 29, 2024, 11:32:05 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Algec

Pages: 1
1
General Mach Discussion / REF ALL HOME problems with 4º Axe
« on: August 24, 2012, 08:00:05 AM »
I have a problem with task of make the zero machine ajust.
 It task always worked well, but since I "put on" the 4th axis,it does all the work.
 If I push REF ALL HOME, MAch3 move the X, Y and Z and light green LEDs indicating which are indexed when each axis touch the limits switch , but when this three axes finish, all the leds greens turn red and dont are ready for use software limits.
 The lEDs of all axes is now red and I'm not willing that the machine coordinates are well referenced.
 The 4th axis is rotary.
 If I remove the 4th axis use,this task work fine again. Make same and when Z Axe touch limit switchs all leds tare green and I can use software limits
 I dont know where indicate to Mach3 that the 4th axis must not make the process of resetting the machine coordinate. Can anyone help?
Why this happend?
Excuse my bad english

2
Brains Development / Problems with brain, modbus and MPG
« on: July 28, 2012, 08:22:02 AM »
I use a brain with a modbus /RS232 and MPG
My problem is my MPG slide each axe with no selection of direction and speed.
MPG work ok , the program into the Modbus it is checked and is ok but I think brain maybe bad, please can you check it and say me how can I do for my MPG work ok?
All Modbus is working good.
This is a card who make a friend, Siliconio, and all is checjker and work ok
I paste the brain for you can watch and say me...
Excuse my bad english

3
Spanish / step2mach
« on: December 25, 2011, 02:19:54 PM »
He intentado hacer este sistema ethernet para quitar el puerto paralelo de una vez, pero encuentro algunos problemas.
Alguien ha conseguido que le funcione?, LO conoce? Sabeis si no de algo similar que funcione?
Yo habia pensado en un arduino MEga que ya hay placas ethernet baratas , tiene velocidad de sobra y muchismas E/S.
Deberia controlar TODO, sobre todo los drivers de los motores ya que la idea es quitar totalmente los puertos paralelos.
Por favor informarme, ando estudiando como hacerlo a ver si es psoible.
Ademas creo que eso podria servir con los nuevos PCs sin puerto paralelo y quizas window7 etc

4
Spanish / Entender el interior de MAch3
« on: December 20, 2011, 08:20:27 AM »
LLevo trabajando con MAch3 dos años y he tenido la oportunidad de toquetear varias cosas de su configuracion y tengo mas dudas que cosas claras.
Quiero entender como y porque se hacen algunas cosas para modificarlo y hacerme un pequeño manual que estaria a disposicion de todos y claro esta en castellano. Necesito ayuda ya que llevo dando vueltas a los manuales de Mach3 y los que dan opciones de modificacion y aunque el lenguaje de  macros etc lo entiendo hay mil dudas que me asaltan.
Si alguien que sepa de esto puede ayudarme con todas las cuestiones que acontinuacion planteo le estaria eternamente agradecido.
PAra eso y que no sea engorroso contestarlas hare una especie de lista de dudas.
 1.-) Macros, Plugings , Brains, Scripts
Quizas sea lo mas engorrosos de contestar
No son lo mismo pero se parecen y cada uno con sus cosas.
¿ Cuando cada uno y porque? Y ¿ En que son diferentes?
 2.-)MAcros.-
 Se ejecutan desde el codigo G pero tembien se llaman desde el amch con algunas posibilidades como macropump
Estan en la carpeta macros, pero hay muchas que son de rigen que vienen con el MAch.
¿Porque? ¿ Cuando se ejecutan estas? Me refiero a las macros que vienen con el mach incluidas.
¿Se pueden ejecutar aparte de desde el codigo G ? ¿Como?
3.-)Plugings.-
Lo mismo que con las macros mas o menos, como cuando y porque, como se ejecutan y cada cuanto etc.
4.-) Brains,
Estos ya he visto como editarlos y es facil. Pero porque brains y macros? en algo deben ser diferentes , pero pueden hacer las mismas funciones aparentemente.
5.-)OEMCODES.-.
Ejecutan diversas funciones en MAch, se los puede llamar dentro de macos etc o directamente con teclas de pantalla o de utiles externos como Modbus.
Esto esta claro, pero no esta tan claro todo.
Que significa OEM?
estan los OEMCODES, OEMLEDS, OEM BUTTON......
NEcesito entender a fondo los usos, como donde y porque.
Uso Modbus he configurado cosas y van bien, pero quiero seguir adentrandome y si puedo hacer algunas con Arduino o pic y sin enteneder esto bien no lo consigo.
TEngo manuales en Ingles sobre como modificar Mach3 pero no me aclaro del todo,. necesito directrices fundamentales.
Si logro aclararme yo lo publicare para que todos podamos sacar beneficios.
Muchas gracias

5
General Mach Discussion / OEM CODE 105
« on: December 13, 2011, 08:21:29 AM »

Let's see if I can explain
 I have a modbus with digital inputs I use for various functions and one of them is the machine zero position all axes. That should do the OEM code 105 if I'm not mistaken.
 In fact it worked before, but now it has happened that does nothing or does what he pleases.
 The entrance is well, is proven by changing the work to another OEM code such as booting the Spindle
 That could have happened?
 The OEM code scrits tear? if so, what and where to verify that this right?


6
Spanish / OEMCODE 105
« on: December 13, 2011, 08:00:40 AM »
A ver si logro explicarme
Tengo un modbus con entradas digitales que uso para diversas funciones y una de ellas es el posicionamiento a cero maquina de todos los ejes. Eso debe hacerlo el OEM code 105 si no estoy equivocado.
De hecho antes funcionaba , pero no se que paso que ahora no hace nada o hace lo que le viene en gana.
La entrada esta bien, esta comprobada cambiando la funciona a otro OEM code como por ejemplo arrancar el Spindle
Que puede haber pasado?
Los OEm code arrancan scrits? si es asi cual y donde verificar que esta bien?

Pages: 1