Messages

121

Newfangled Mill Wizard / Re: Pointer to current version

« on: June 04, 2013, 12:03:33 PM »

Hi Ron,

the toolpath in drill looks fine now.

I really like the User G-Code and Tool Strategy feature. I find it really useful. 

Just found that the values in Tool Strategy has not been saved.

Saved the file, closed the file, ( or closed the Wizard ) and then reopened the file ( or open the Wizard )

and looked into tool strategy, all values are Zero.

Regards Alex

122

Newfangled Mill Wizard / Re: PC ID not showing

« on: April 17, 2013, 01:35:15 PM »

Hi Troy

Does your license still work with LAN connection disabled?

No. Only when enabled.

Regards
Alex

123

Newfangled Mill Wizard / Re: PC ID not showing

« on: April 15, 2013, 02:16:05 PM »

Oops,
the last two smilies I accidentally swapped.
Alex

124

Newfangled Mill Wizard / Re: PC ID not showing

« on: April 15, 2013, 02:10:07 PM »

Hi all,
just an info.
Some days ago I tried to install the license.
No luck first.  Then after an hour or so I had the idea to enable LAN  (  normally deactivated due to it is not an internet PC )
That did the trick. 
LAN activated = license 
LAN deactivated =no license 

Alex

125

Newfangled Mill Wizard / Metric units In drill cycle not metric in Z

« on: April 06, 2013, 05:19:32 PM »

Hi Ron,
while playing around with the wizard demo I found this.

The Z depth of both the circular pocket and the hole circle is the same in the settings.
X and Y is OK but Z seems to be inches in all drill operations. (screenshot)

BTW I really like the clean easy to use design.

Regards
Alex

126

General Mach Discussion / Re: How to make Lathe G83 peck run faster

« on: April 05, 2013, 10:24:47 PM »

No Probs. Paul.

I owe you a cold one (or hot one, whatever you prefer).

I assume you mean beer. I like that cold 

 

Alex

127

General Mach Discussion / Re: How to make Lathe G83 peck run faster

« on: April 05, 2013, 05:20:47 PM »

 

Alex

128

General Mach Discussion / Re: How to make Lathe G83 peck run faster

« on: April 05, 2013, 05:15:58 PM »

Hi Hood,
thanks.
Should be free from issues I hope.
Took me two weeks that "damn" thing 

Alex

129

General Mach Discussion / Re: How to make Lathe G83 peck run faster

« on: April 05, 2013, 04:15:53 PM »

me again,

just see its not solved. The G83.1 ( high speed peck drill ) is running now,

but not the G83 what you want.


If you like risk  you may want to give the attached cycle ( modified by me ) a try.

On your OWN RISC, NO GUARANTEE at all. It should be running fine. BUT WHO KNOWS?

Rename it to M1083.m1s and place it to your lathe profile macros folder.


Alex

130

General Mach Discussion / Re: How to make Lathe G83 peck run faster

« on: April 05, 2013, 03:26:55 PM »

Hi Paul,

I am pretty sure there is no setting for this.

Please read the changelog ( last entry ) it is solved in 0.62

Alex