Messages

71

LazyCam (Beta) / Re: Zoom box

« on: May 23, 2007, 12:23:33 PM »

Hi
 Hold down the left mouse button and drag across the part you want to zoom in.That should work

72

LazyCam (Beta) / Re: LazyCam ver 2.01

« on: May 17, 2007, 09:39:39 AM »

Hi Brain
That is what I have been doing even if you do a change I have to go back and do it a couple times for it to save the change
     thanks again

73

LazyCam (Beta) / LazyCam ver 2.01

« on: May 16, 2007, 02:40:34 PM »

Hello Everone
Has any one had the problem if you clean the drawing that you manuel have to click every leadin and outs and set them indeiva like uncheck climb mill
in the Lead configuration I know older ver it did not work that way But sins upgrading ver 2.00 and the newest ver 2.01 I have the same problem I would like to hear from someone has the same problem or to tell me what I am doing wroung
                                                         Thanks every one for the great support forms 

74

Competitions / Re: ******Guess and win a G100 Grex******

« on: May 15, 2007, 12:28:14 PM »

Hi Guys
You just as well quick i think I got it 2,299,371 But again I could be wrong that would be the first time   ha ha ah aha   

75

General Mach Discussion / Re: servos not traveling proper distance, new install of 2.0

« on: May 11, 2007, 12:01:42 PM »

Brain is right on the Breakout board I had a very bad noise problem Brain tooled me to add a Breakout board that took care of the problem I would suggest every one to use it
  Glad someone was able to help me Thank you

76

LazyCam (Beta) / LazyCam Text Feature

« on: May 10, 2007, 10:03:21 AM »

Hello EveryOne
 Has any one played with Lazycam Text feature I can only write in it only if you have had axisting file open and then closed then it would save it
to the file that you closed that is not good. there is nothing a guy can do with the text not even delete it or work around on it Am I doing something wroung Just my thought would if be nice to have icon on the buttons instead of colors and writing I try not to complaine and try to help make the best even better
           THANKS AGAIN EVERYONE FOR YOUR HARD WORK     

77

LazyCam (Beta) / Re: Lcam 2.0...

« on: May 07, 2007, 02:35:52 PM »

Hi
Where can a guy download LC ver 2.00.2 I don't see it on the web
                                      thank you

Download the LazyCam in normal download, It's Been updated, Just doesn't show new Ver., Chip

78

LazyCam (Beta) / Re: Lcam 2.0...

« on: May 07, 2007, 02:27:33 PM »

Hello Everyone
I have the same problem on one computer it works as afn09556 has posted but on  the other one no  matter what I do I always get a errors out to Windows error report just to let you know some other guys have a problem to has any one tryed the Mach 3 Load button In LC my dose nothing or less I am not doing something right  I am not complaning just testing
                                                                          markkl

79

LazyCam (Beta) / Re: Lcam 2.0...

« on: May 04, 2007, 05:31:56 PM »

Hi Brain
I did get the lead in and out problem working but i do not know what I did Differnt

80

LazyCam (Beta) / Re: Lcam 2.0...

« on: May 04, 2007, 05:21:33 PM »

Hi Brain and Art
 Before i tell you of a problem i have i want to Thank you guys for the hard work you do to make oures easier one thing I had to smile about is the OOOPS button you hit the nail on the head with that one  I have a problem if I want to change from the inside left or the outside right if I double click the lead in I get the LEAD CONFIGURATION box coming up if I change inside left to outside right or back and fort it dose not change on the tool path 
                                                    THANK AGAIN