Messages

101

General Mach Discussion / Re: Jogging Z axis while machine is cutting

« on: March 12, 2007, 05:40:21 PM »

Hi Guys
You are on the right track if we could make this a really relay hot topic more guys would get involved and get it done this feature would work great for all plasma and flame cutting machine even for guys that use plasma that do not need automatic height control on heaver steel But leave me out of it because i do not know anything about VB and all that stuff But i am willing  to demo it if anybody would write it  for me because on the writing part i do not know head from toe   
                                               SO LET KEEP IT ROLLING AND GET SOMETHING DONE
                                                 THANK YOU EVERY one FOR THERE REPLY

102

General Mach Discussion / Re: stop waiting G4

« on: March 12, 2007, 02:46:32 PM »

on a flamcutting a guy dose quiet a bit of plunging as far as the cam i plan to use lazycam i appreciate our feedback Thank you

103

General Mach Discussion / Re: stop waiting G4

« on: March 12, 2007, 02:12:09 PM »

would i have to add M1 Manuel on every plunge If that is so there has to be a better way

104

General Mach Discussion / Re: stop waiting G4

« on: March 12, 2007, 09:47:31 AM »

Hi axilleas
I am Mark   I am new to a mack licence user on the dwell post you guys talk what i want on my cnc machine I use a flam cutter and plan to add on a plasma but a the dwell feature i want z axis to plunge down preheat until i comment the machine to start the torch and start moving the x y axis on the toolpath i know it can be done because you guys talk about it in the forums so Please let me know how to do it it would be greatly appreciate

105

General Mach Discussion / Re: stop waiting G4

« on: March 11, 2007, 10:34:27 AM »

hi guys
how would i get contact with the user name axilleas he talk about dwell features that i realy need and would like but i need more help i am new to mach 3 Thank you ley me know

106

General Mach Discussion / Re: Jogging Z axis while machine is cutting

« on: March 10, 2007, 09:41:40 AM »

Hi Guys
We do it in the feed over ride why could it not work the same way on the z axis working between the work DRO and the machine DRO

107

General Mach Discussion / Jogging Z axis while machine is cutting

« on: March 08, 2007, 05:04:52 PM »

Hi Guys
 I use a cnc flame cutter and plane to add on a plasma in the near future . My question is it possible to jog the Z axis up and down to fine tune
from the work peace when the machine is cutting . The z axis is also a stepper motor any help would be appreciated  I use MACH 3 software
   THANK YOU