Messages

911

General Mach Discussion / Re: Using Drawings and Cam programs on a computer running Mach 3

« on: March 10, 2015, 04:54:25 AM »

take what rich said over what I said it was my computers yours my be diffrent

912

General Mach Discussion / Re: Using Drawings and Cam programs on a computer running Mach 3

« on: March 10, 2015, 02:48:11 AM »

it pays not to some computers cant handle M3 very well and having a cad program running at the same time can make it worse I have tried it and it was a bad idea on both my machines

913

Mach4 General Discussion / Re: Mach 4 Tool Auto Zero

« on: March 07, 2015, 09:31:44 PM »

I think whats below is what you wont if wrong ever development team will say the squire or round one


mcCntlGCodeExecuteWait(inst, "G53 Y0 Z0")--Move back to the YOffset line
      if rc ~= mc.MERROR_NOERROR then return "Could not complete GCode motion", false end
   else
      mcCntlGCodeExecuteWait(inst, "G53 Y0 Z0")--Move to the YOffset line
      if rc ~= mc.MERROR_NOERROR then return "Could not complete GCode motion", false end

914

General Mach Discussion / Re: cam programs

« on: March 07, 2015, 05:19:18 PM »

vectric cut2D cant get any easyer

915

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: March 03, 2015, 05:59:52 PM »

try removing C /mach4/profiles/Mach4Mill/Macros M3, M4, M5, .mcc and .mcs also mcLua.mcc and m6.mcc.

and remove sim.m4pw and sim.sig from plugins this can make Darwin play up in M4

other than that only the cnc gods know

916

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: March 03, 2015, 04:41:14 PM »

C drive Mach4 file last bit in file is wxMach4 its a lock out from changeing screen

917

Mach4 General Discussion / Re: Mach 4 / PMDX-422 Setup for Dummies

« on: March 01, 2015, 10:40:06 PM »

yer it confusing at first once you done it 10 x it`s ok

918

Mach4 General Discussion / Needing help with Wizards

« on: March 01, 2015, 06:30:50 PM »

http://sourceforge.net/projects/wxformbuilder/

919

Mach4 General Discussion / Re: Mach4 Printer Port Discussions

« on: February 28, 2015, 06:05:52 PM »

yes

920

General Mach Discussion / Re: Cuts are flipped

« on: February 28, 2015, 04:35:19 PM »

stand in front of the machine facing  the X axis it should be in front of you so if it move left - left arrow, right + right arrow.

z up is PgUp button Z- is PgDn button

if those to are doing that good

Y+ is away from you up arrow, Y- is to you down arrow

if wrong ger21 will correct me