661
General Mach Discussion / Re: CSMIO-IP/A and max velocity setting?
« on: June 29, 2016, 09:54:51 AM »
The setting you have in your servo drive for the RPM at 10v is the number you use.
So for example, you have your servo set to 3000rpm per 10v and you have a 2:1 ratio with a 5mm pitch screw.
3000rpm /2 (gearing) x 5mm pitch, Velocity in Mach would be 7500mm/min
Hood
So for example, you have your servo set to 3000rpm per 10v and you have a 2:1 ratio with a 5mm pitch screw.
3000rpm /2 (gearing) x 5mm pitch, Velocity in Mach would be 7500mm/min
Hood