4091
General Mach Discussion / Re: Machanical Automatic Tool Changer
« on: October 14, 2013, 05:15:52 PM »
Yes if you used the stock amps you would just use the encoders for the CSMIO, the Tach on the motors would go to the amps as they do now.
If you went AMC drives then you could choose whether just to get ones with tach feedback or you could choose encoder feedback and then you would take the encoder output from the drives to the CSMIO.
Hood
If you went AMC drives then you could choose whether just to get ones with tach feedback or you could choose encoder feedback and then you would take the encoder output from the drives to the CSMIO.
Hood