4061
General Mach Discussion / Re: mach 3 spindle rpm display
« on: October 19, 2013, 05:48:26 PM »
You can only use Index in Mach now as Timing is no longer used.
For Index it is 1 slot per rev although having more will jus show as multiple revs per true rev. One thing however is it may be that the slots are too narrow and close for Mach to see if there are multiple slots.
What is your Index Debounce set to?
Are you telling Mach the spindle is on by calling M3/M4 or pressing the spindle button?
If you want to attach your xml I will have a look through it to see if I see a problem.
Hood
For Index it is 1 slot per rev although having more will jus show as multiple revs per true rev. One thing however is it may be that the slots are too narrow and close for Mach to see if there are multiple slots.
What is your Index Debounce set to?
Are you telling Mach the spindle is on by calling M3/M4 or pressing the spindle button?
If you want to attach your xml I will have a look through it to see if I see a problem.
Hood